Author Topic: Help for installing a Voodoo4 on A4000T (Read 1331 times)

Phantom · « **on:** May 19, 2008, 06:21:37 PM »

I would appreciate if anyone will give me a simple guide how to install a Voodoo4 PCI card on my A4000T. I did exactly what the guide on MMCD said, but my Amiga can't recognize the card. Any ideas?

Also can anyone tell me how I must set the jumpers on the CoreLogic card of the Mediator?

I have set the following:

MASTER - Closed (No SharkPPC)
SWAPINFO - Opened (No Zorro3 GFX Card installed)
WINSIZE - Closed (For use with Voodoo4 or Voodoo5 cards)

I hope that they are correct.

mike- · « **Reply #1 on:** May 19, 2008, 07:21:15 PM »

I have the same problem with my voodoo5 atm...
It worked fantastically the fist time i set up the mediator, but now nada, i managed to almost get it up once, but then the a4k crashed... But it seems to be something with p96 and or drivers from elbox.

I tried uninstalling and reinstalling p96 according to the voodoo45 guide, thats when i got a response from p96.

wurzel · « **Reply #2 on:** May 19, 2008, 08:54:43 PM »

Sorry I can't help really, but I also had problems installing a Voodoo4500 in my A1200.

It worked a couple of times while I had the Tower apart, but it just closed down as soon as I put everything together!

I now have a Voodoo5500 and it works just fine.

mike- · « **Reply #3 on:** May 20, 2008, 03:01:42 PM »

Ok, i took the voodoo5 card out, cleaned the pins with a PRF 6-68 cleaning agent, uninstalled p96, reinstalled p96, installed the mediator thingie, ran trough medconfig, did the update p96 monitor settings and went to p96mode and there it was

Phantom · « **Reply #4 on:** May 20, 2008, 03:20:17 PM »

I just followed a thread, in which Daniele had the same problem. I did the same things mentioned and it worked. Just ignore Step 3 from the Voodoo.Guide from the MMCD from Elbox. Thanks!!!

mike- · « **Reply #5 on:** May 20, 2008, 03:37:43 PM »

Any idea how to use the remaining voodoo memory as system mem?

mike- · « **Reply #6 on:** May 20, 2008, 03:38:56 PM »

yeah, quick_install copies it :S
Thats what i did now too now btw. But thats down to dumb luck again

Author Topic: Help for installing a Voodoo4 on A4000T (Read 1331 times)

Phantom

Help for installing a Voodoo4 on A4000T

mike-

Re: Help for installing a Voodoo4 on A4000T

wurzel

Re: Help for installing a Voodoo4 on A4000T

mike-

Re: Help for installing a Voodoo4 on A4000T

Phantom

Re: Help for installing a Voodoo4 on A4000T

mike-

Re: Help for installing a Voodoo4 on A4000T

mike-

Re: Help for installing a Voodoo4 on A4000T