|06-21-2004, 01:26 AM||#1|
Apollo stops working when i instal squirrel driver help
Well my apollo works great so does my squirrel scsi pcmcia card but put the together and it wont boot, any fix, or other drivers i can use to fix this problem.
|06-21-2004, 09:15 AM||#2|
Energizer Bunny of Babble
Join Date: Mar 2002
Re: Apollo stops working when i instal squirrel driver help
Is the apollo an accelerator or just a memory upgrade?
It may be that the card and squirrel can`t work together due to sharing the same memory address for the pcmcia port...
Try less memory (ie 4 Mb, to see)
If it`s an accelerator (030, 040, 060) then i don`t know...
<but you could try disabling the onbord memory/processor with the jumpers to test if it`s a HW problem>
<could also be a timing problem - try testing another card(?)>
http://www.amiga.org/themes/Amiga.or...ange_arrow.gif[size=x-small]For Astronomy News[/size]
|working , stops , squirrel , instal , apollo , driver|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Squirrel SCSI CD ROM Drive not working on A1200||wandeep||Amiga Hardware Issues and discussion||37||05-28-2012 02:14 AM|
|AMIGA 1200 SQUIRREL CDROM CD32 NOT WORKING?||amigaguy00||Amiga Hardware Issues and discussion||18||09-15-2007 09:59 AM|
|Installed right angled adaptor, prism2.device stops working||Amiga Hardware Issues and discussion||21||05-21-2005 10:17 AM|
|Driver for Squirrel SCSI||fx||Amiga Hardware Issues and discussion||2||04-21-2004 02:03 PM|
|3000T Keyboard stops working?||matt3k||Amiga Hardware Issues and discussion||8||01-05-2004 05:24 PM|