|05-01-2004, 08:03 AM||#1|
Mediator 1200LT/Voodoo3 PCI - RTG GUI screws up a lot
I have just built my A1200 into a tower case with a Mediator 1200 LT and a Voodoo 3 card. I have a problem though. I used to use OS 3.9 in AGA mode and all was fine. Now I use it in RTG mode via Picasso96 and the voodoo.card driver on the MMcd. About 1 in 5 reboots everything is fine, but the rest of the time the GUI is screwed up - the file icons and gadgets vanish (the spots where they should be still work) stuff doesn't refresh and generally it all cacks up very quickly.
Has anyone run into this before?
A1200 Rev 1.D4
Eyetech CIA keyboard adapter (EZ-Key ES)
Mediator 1200LT PCI (2 slots inactive)
Voodoo3/2000 PCI (16MB) in lower PCI slot
IDEFix 97 board with 2 HDDs and a CD-ROM drive attached
OS 3.9 with lots of extras
I have tried all the obvious stuff like reseating the Mediator and the GFX card.
Mark Benson - Realist and Curmudgeon -
A1200 \'C=Flash\' games machine
|lot , 1200lt or voodoo3 , pci , voodoo , rtg , mediator , screws , gui|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Lost my low res screenmodes - Mediator - Voodoo3 :(||Angus||Amiga Hardware Issues and discussion||6||10-11-2008 06:06 AM|
|Warp3d and Mediator/Voodoo3 Slowdown||lorddef||Amiga Hardware Issues and discussion||7||09-19-2006 11:53 PM|
|Voodoo3 / Mediator 4000Di||nyteschayde||Amiga Hardware Issues and discussion||9||10-31-2005 05:43 PM|
|help setting up mediator ,voodoo3 2000||Peter_s||Amiga Hardware Issues and discussion||0||05-06-2004 11:24 AM|
|mediator/voodoo3/ppc demos quastion||kas1e||Amiga Hardware Issues and discussion||6||06-01-2003 07:58 AM|