|03-09-2004, 02:28 AM||#1|
Join Date: Oct 2003
Warp config problem?
Im using an A1200, Blizzard 060/PPC, Mediator, Voodoo3 and OS3.9 setup.
Ive just downloaded Warpup and Warp3d from Aminet, and when I try to run the demos supplied in the installation I get a message saying that PPC.LIBRARY is running.
When this is Terminated, I can run the Voxelspace demo from Warpup, but only in Window.
The P96 version shows nothing visable.
Onto the Warp3d demos, Warptest also fails with nothing visable.
Any ideas what Im doing wrong?
|03-10-2004, 12:54 PM||#2|
Too much caffeine
Join Date: Apr 2003
Re: Warp config problem?
Thats easy one.
PowerUp kernel is hidden in flashRom and starts always, before anything else from disk.
If it runs it takes over PPC and WarpOs cannot start.
To do so you have to download from aminet BPPCFix (look for 1.4, as previous 1.2 had a bug).
This thing installs the handler to remove PowerUp AT THE NEXT STARTUP.
So you must run it in your startup-sequence, then reboot, then you can start without PowerUp and are free to start WarpOs.
Thats enough for a start.
If you have any further problems, come back and ask.
|config , problem , warp|
|Thread||Thread Starter||Forum||Replies||Last Post|
|UAE Config for Linux||XDelusion||Amiga Emulation||0||11-02-2007 04:41 PM|
|Warp Engine scsi tools HD formatting problem||T3000||Amiga Hardware Issues and discussion||5||08-10-2007 04:00 PM|
|Mediator Config problem||dbrads||Amiga Hardware Issues and discussion||7||05-23-2007 06:42 AM|
|Warp 3D problem||TNovosel||Amiga Software Issues and Discussion||1||08-26-2005 04:42 AM|
|Config problem on Prelude Z2 and AHi||Crusher||Amiga Software Issues and Discussion||0||07-29-2004 11:52 AM|