Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: 3D Printer Service  (Read 347 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline trekiejTopic starter

3D Printer Service
« on: April 28, 2016, 11:42:39 PM »
How much would it cost to make a replacement Amiga 1000 front cover?
This is not the ram cover.
Thanks.
Logged
Amiga 2000 Forever :)
Welcome to the Planar System.
 

Offline Darth_X

  • Hero Member
  • *****
  • Join Date: Jan 2003
  • Posts: 791
    • Show only replies by Darth_X
Re: 3D Printer Service
« Reply #1 on: April 30, 2016, 03:43:54 AM »
Quote from: trekiej;807690
How much would it cost to make a replacement Amiga 1000 front cover?
This is not the ram cover.
Thanks.


And an A3000 floppy drive cover.
Logged
 

Offline Acill

Re: 3D Printer Service
« Reply #2 on: April 30, 2016, 03:57:49 AM »
Oh! Oh!! and an A4000T front door!
Logged
Proud Retired Navy Chief!

A4000T - CSPPC - Mediator
Powerbook G4 15", 17"
Powermac G5 2GHZ
AmigaOne X5000
Need Amiga recap or other services in the US? Visit my website at http://www.acill.com and take a look or on facebook at http://facebook.com/acillclassics
 

Offline WeiXing3D

  • Sr. Member
  • ****
  • Join Date: May 2012
  • Posts: 407
    • Show only replies by WeiXing3D
Re: 3D Printer Service.
« Reply #3 on: April 30, 2016, 05:54:10 AM »
Quote from: Acill;807729
Oh! Oh!! and an A4000T front door!


I asked this person Pierluigi Cerutti, which I believe is in Italy, for a A3000 replica case for my FPGA Replay and told me that it would run between  £200-£300.

If still interested in contacting him, send me a PM and I will give you his email address.
Logged
Amiga 1200 fully loaded by Aclii.
AmigaONE X5000 with OS4.1 FE
FPGA Arcade board in miniITX case with AmigaOS3.9 and WB 3.1.
MorphOS 3.9 in Mac Mini G4 1.5GHz, PowerBook & Power Mac G5
Acer Aspire One with AROS Icaros Desktop 2.1.1 &
MiST FPGA Minimig Amiga AGA Workbench 3.9 PFS3 configuration.
 

Offline Acill

Re: 3D Printer Service.
« Reply #4 on: April 30, 2016, 06:06:41 PM »
Quote from: WeiXing3D;807733
I asked this person Pierluigi Cerutti, which I believe is in Italy, for a A3000 replica case for my FPGA Replay and told me that it would run between  £200-£300.

If still interested in contacting him, send me a PM and I will give you his email address.


I may just do that, but not having the plans for an A4000T door is an issue. Mine is only broke at the latch like I see a lot of them. It still functions.
Logged
Proud Retired Navy Chief!

A4000T - CSPPC - Mediator
Powerbook G4 15", 17"
Powermac G5 2GHZ
AmigaOne X5000
Need Amiga recap or other services in the US? Visit my website at http://www.acill.com and take a look or on facebook at http://facebook.com/acillclassics
 

Offline trekiejTopic starter

Re: 3D Printer Service.
« Reply #5 on: April 30, 2016, 11:00:10 PM »
I really would like to have a Solid State FDD that fits the A1000 style.
A replacement face for A3000 would be cool.
Logged
Amiga 2000 Forever :)
Welcome to the Planar System.
 

Offline RobertB

  • VIP / Donor - Lifetime Member
  • Hero Member
  • *****
  • Join Date: Jun 2005
  • Posts: 1838
  • Thanked: 23 times
    • Show only replies by RobertB
    • http://www.dickestel.com/fcug.htm
Re: 3D Printer Service.
« Reply #6 on: May 01, 2016, 05:06:46 AM »
Some bits are at

http://www.shapeways.com/designer/Tommes

Truly,
Robert Bernardo
Fresno Commodore User Group
http://www.dickestel.com/fcug.htm
July 30-31 Commodore Vegas Expo v12 -
http://www.portcommodore.com/commvex
Logged
 

Offline trekiejTopic starter

Re: 3D Printer Service.
« Reply #7 on: May 01, 2016, 07:12:50 PM »
Type in amiga and there is a lot of stuff.
Logged
Amiga 2000 Forever :)
Welcome to the Planar System.
 
Pages: [1]   Go Up
« previous next »