Register or have you forgotten your password?
|
|
Register or have you forgotten your password?
|
All times are GMT -6. The time now is 12:31 AM.
| Welcome to Forum, please register to access all of our features.
|
|
| Amiga Hardware Issues and discussion This forum is dedicated to the discussion and resolution of issues related to Classic and Next Generation Amiga hardware. Got a problem with a piece of hardware? Click to speak. |
 |
|
|
Thread Tools | Display Modes |
12-05-2012, 04:56 PM
|
#1 | ||||||||
|
Too much caffeine
Join Date: Mar 2002
Posts: 106
|
A4000 Expansion Board Failure
Hi all!
Trying to get my old A4000 desktop to boot up again, and I'm getting a red 'Expansion Board Diagnostic' screen, which shows all of my Zorro cards working, but a defective board somewhere: Board Number: 1 Manufacturer: 64 Product: 0 Status: Defective I can't find any reference to that manufacturer number anywhere! Does anyone have any ideas? I have a CyberStorm Mk2 060 board in there without the SCSI module attached, and 128Mb RAM on board. The only Zorro cards I have plugged is a CyberVision64 (Man. 8512) and Algor (Man. 2145) which are both working. Any ideas? Cheers, Daniel |
||||||||
|
|
|
12-05-2012, 05:40 PM
|
#2 | ||||||||
|
Too much caffeine
Join Date: Mar 2002
Posts: 106
|
Re: A4000 Expansion Board Failure
Ha, forget it, it was the CV64, which gives different manufacturer IDs depending on how "seated" it is in the Zorro slot.
I've removed it and firmly seated it back in place and everything seems to be working fine now. |
||||||||
|
|
|
|
| Bookmarks |
| Tags |
| a4000 , board , expansion , failure |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
