»

[S0nic]

last time i was play i move little luma cable and i get sound on c64 play little then turn off c64 , today i try again to play and i have problem:

with luma cable i have good picture on 1084s with c64 but there is no sound, try to move luma cable left-right up-down but still no sound

open amiga 500 and amiga 600 connect it on RGB port with 1084s , still no sound on amiga's and picture on RGB port is not good like on c64 , i have sh.t picture lot's of black and no sound with RGB , here is video

http://www.youtube.com/watch?feature...&v=VRugXNHOZrE

[kickstart]

@sonic

sorry i dont understand your explain at all but rgb and luma arent the same, 1084s hace some switch on the back, try it with the correct position.

[S0nic]

Originally Posted by kickstart

@sonic

sorry i dont understand your explain at all but rgb and luma arent the same, 1084s hace some switch on the back, try it with the correct position.

yeah i know , i use luma for c64 and rgb for amiga's , when i wish to use amiga's i click back on rgb button and have amiga's if i wish to have c64 i turn off that button and have luma signal , but there is no sound on luma and rgb , when i play on c64 with luma have good picture no sound, when i click use rgb with amiga's i have sh.t picture (like on video i send up) and no sound like on luma

[kickstart]

@sonic

Dont know... maybe the cable, speakers... try with headphones connected to monitor (maybe speakers dont work) or use another sound source (mp3 player).

[S0nic]

i get sound with chinch cable on amiga but picture on amiga are still sh.t on c64 with luma i have good picture but there is no sound

why i have oem commodore luma cable with 3 chich what is differnt between that and this luma cable with 4 chinch ?

http://www.ebay.com/itm/Commodore-64...-/260894700043

[S0nic]

is this two cable are same , i have this one





i think that cable is broken so i will buy another i think monitor is OK because i have normal picture with c64 (luma)

is this cable same like mine on first picture




I ask is cable same because the pin on smaller part of cable are not same on mine (first picture) and on this on second picture so maybe i have bad picture on rgb is because of that pin's or my cable is really broken and don't work , or rgb port on monitor 1084s don't work

[kickstart]

The original 1084s rgb cable is like your first pic.

[S0nic]

Originally Posted by kickstart

The original 1084s rgb cable is like your first pic.

second picture cable is original commodore too , what is difference between this 2 cable, pin on smaller part not on same place