|
Register or have you forgotten your password?
|
|
|
| Amiga Hardware Issues and discussion This forum is dedicated to the discussion and resolution of issues related to Classic and Next Generation Amiga hardware. Got a problem with a piece of hardware? Click to speak. |
![]() |
|
|
Thread Tools | Display Modes |
|
|
#16 | ||||||||
|
Kindred of Babble-on
![]()
Join Date: Jun 2002
Posts: 2,925
|
You can use as many different file systems as you can fit on your harddrives. But you can only use one version of the same file system. So if you've installed FastFileSystem on different harddrives, the highest version of FastFileSystem found is used for all harddrives. But you can use FFS, PFS, SFS all at the same time (on different partitions of course). And certainly higher versions of FastFileSystem still work with small drives.
A file system is identified by its identifier a.k.a. DosType. You can add different versions of the same file system if you assign different identifiers to them. |
||||||||
|
|
|
|
|
#17 | ||||||||
|
Beginner
![]()
Join Date: Mar 2009
Posts: 25
|
hmmmmm
right now i have an ancient 5 inch half height 340 mb drive as device 0. the old clunker just wont die. so i have sys (dh0) on it. then i have two ancient western digital 200 mb drives as dh1 (network) and dh2 (work) holding device 3 is a seagate 9.3 gb drive. i have a 500 mb partition on it but the rest is no mans land. i tried 2 4 gb partitions, 8 500 mb partitions, etc using ffs that came with wb 3.1. all failed except the 500 mb all by itself. so now im tempted to try nsd, for example on the 9 gb. lets say 2 4.000 gb partitions. maybe im missing the point on the exact geometry. would 2 4gb partitions avoid the boundary issues or am i actually screwing up both partitions? what im being thick headed about is... do i leave all the small drives as they are with ffs and ONLY try nsd on the 9 gb, or do i need to use nsd on ALL drives no matter what? im not worried about experimenting because, yup, i have an ancient 150 mb 6150 drive and lots and lots of tape. thanks again! |
||||||||
|
|
|
|
|
#18 | ||||||||
|
Technoid
![]()
Join Date: Aug 2008
Location: Amarillo, TX
Posts: 416
|
For some reason I've gotten it into my head that 1.3 and 2.x were limited to a total of 2Gb.
And I seem to remember a disk that came out for the 2000 for a 1.3 HD install/reinstall. Curtis
__________________
Outside a dog, a book is a man's best friend. Inside a dog it's too dark to read! Groucho Marx Curtis McCain http://www.suddenlink.net/pages/curtismc |
||||||||
|
|
|
![]() |
| Bookmarks |
| Tags |
| amiga , drive , hard , limitations , size |
| Thread Tools | |
| Display Modes | |
|
|