Register or have you forgotten your password?
|
|
Register or have you forgotten your password?
|
All times are GMT -6. The time now is 07:00 AM.
| Welcome to Forum, please register to access all of our features.
|
|
| Amiga Hardware Issues and discussion This forum is dedicated to the discussion and resolution of issues related to Classic and Next Generation Amiga hardware. Got a problem with a piece of hardware? Click to speak. |
 |
|
|
Thread Tools | Display Modes |
10-20-2011, 11:46 AM
|
#1 | ||||||||
|
Beginner
Join Date: Aug 2011
Location: POLAND , STATE WIELKOPOLSKA
Posts: 48
|
Compserv Scandoubler slightly distorted when cold
when it is cold for about 30 seconds the image is slightly distorted after a short time is already good, I have a question faulty scan doubler? or not?
30 seconds after, the picture is excellent and you can use all day without any problems Last edited by Blendor_POLAND; 10-20-2011 at 11:48 AM.. |
||||||||
|
|
|
10-20-2011, 12:23 PM
|
#2 | ||||||||
|
Technoid
Join Date: Jan 2005
Posts: 197
|
Re: Compserv Scandoubler slightly distorted when cold
I have the same problem with my CybervisionPPC- gfx card, I'm suspecting bad capacitors.
Is it the Comp Serv II card you have? I have one of those, and its not working properly in my A4000T, though its working perfectly in an A4000D. |
||||||||
|
|
|
|
10-20-2011, 12:25 PM
|
#3 | ||||||||
|
Beginner
Join Date: Aug 2011
Location: POLAND , STATE WIELKOPOLSKA
Posts: 48
|
Re: Compserv Scandoubler slightly distorted when cold
compserv version 1.1
|
||||||||
|
|
|
|
10-20-2011, 12:48 PM
|
#4 | |||||||||
|
Premium Member
Join Date: Feb 2002
Posts: 889
|
Re: Compserv Scandoubler slightly distorted when cold
Quote:
You can try to find and fix the connection, but I don't know if I'd bother unless it gets worse. 30 seconds isn't that long to wait. |
|||||||||
|
|
|
|
10-20-2011, 01:09 PM
|
#5 | ||||||||
|
Beginner
Join Date: Aug 2011
Location: POLAND , STATE WIELKOPOLSKA
Posts: 48
|
Re: Compserv Scandoubler slightly distorted when cold
Connector is not a problem, but for me it's not a problem a while wait few seconds for the image stabilization, I ask for curiosity, I read the instructions from external Elbox Scandoubler and the manufacturer recommends you wait for 5 minutes to complete correctness of these types of device that can have
 hehe
|
||||||||
|
|
|
|
10-20-2011, 01:45 PM
|
#6 | ||||||||
|
Technoid
Join Date: Jan 2005
Posts: 197
|
Re: Compserv Scandoubler slightly distorted when cold
Yes, the external scandoublers definetly needs a bit of warming up before they produce a stable image. For the Comp Serv though, I'd just leave it the way it is too.
|
||||||||
|
|
|
|
10-20-2011, 02:14 PM
|
#7 | ||||||||
|
Kindred of Babble-on
Join Date: Feb 2002
Location: finland
Posts: 2,130
|
Re: Compserv Scandoubler slightly distorted when cold
I'd say cheap components and simple circuits are prone to changing values and so the trim crawls - just like my external EZ-VGA sd/FliFi.
|
||||||||
|
|
|
|
10-20-2011, 02:31 PM
|
#8 | ||||||||
|
Beginner
Join Date: Aug 2011
Location: POLAND , STATE WIELKOPOLSKA
Posts: 48
|
Re: Compserv Scandoubler slightly distorted when cold
ok this is not big problem for me , SC work super , this problem is very very lightly
|
||||||||
|
|
|
|
10-28-2011, 07:55 AM
|
#9 | ||||||||
|
Beginner
Join Date: Aug 2011
Location: POLAND , STATE WIELKOPOLSKA
Posts: 48
|
Re: Compserv Scandoubler slightly distorted when cold
problem solved, a new power supply atx weak corsair cx430 is too weak for amiga 4000 cybervision64 + scandoubler compserv !!! !!!, I put the old power supply atx 145watt ACBEL IBM and scandoubler works ok
AMAZING
|
||||||||
|
|
|
|
| Bookmarks |
| Tags |
| cold , compserv , distorted , scandoubler , slightly |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
