»

Hi

Does anyone here know if picasso4 is able to run in Zorro3 mode with a rev 9 Buster?

My amiga refuses to boot if i have my picasso4 running in Z2/Z3 autosence mode, so i have to force it to run in Z2 mode and that is very slow.
It was running fine in Z2/z3 autosence mode when i bought it, but when i installed it in my machine it didn't work

My setup:
A4k
KS 3.1
Buster Rev 9
Cyberstorm MK2 040/40
Micronik ISA 4000 Busboard
Ariadne network card
GVP I/O Extender

please help me before i go insane!

[4pLaY]

Should work just fine i once ran a A4k with buster 9 and a brand new PIV card and it worked just fine! perhaps the card is faulty or the mobo has some issues! if you can try it in a friends Amiga.

[xeron]

I don't know, but software hut does Rev 11 busters for $29.95:

Click me

I think Power Computing used to do them in the UK, but a quick search on there just turned up nothing :-(

[4pLaY]

Hmm now that i think of it more it could be the micronik thats the problem! if you have the original zorro brigde try that one.

[tonyw]

I remember when I got my Picasso IV (or was it the Picasso II before that?), the 4000 used to lock up occasionally and I was advised to upgrade the Buster.
Since I did so back in 1994, I've never had a lockup since.

To be honest, I can't remember whether it was the PII or the PIV, but the bus circuitry is probably similar. I'm sure that if you upgrade your Buster, the problem will go away. It's a well known and documented problem.

tony

i bought the picasso and bussboard from the same person when he upgraded to a mirage tower so the problem should be my mobo, but i might test with the original zorro bridge some day anyway.
And i'm not sure if i want to invest my money into a new buster when i'm not sure that it will cure my problem.
It's a pretty stable machine exept for that Z3 problem, it has 23days uptime now

[zipper]

I had no problems to run CVPPC and PIV and CV3D at the
same time except some lost speed in my A4k/buster9.

z

[zipper]

I had no problems to run CVPPC and PIV and CV3D at the
same time except some lost speed in my A4k/buster9.

z

[zipper]

I had no problems to run CVPPC and PIV and CV3D at the
same time except some lost speed in my A4k/buster9.

z

[zipper]

I had no problems to run CVPPC and PIV and CV3D at the
same time except some lost speed in my A4k/buster9.

z

[zipper]

...but severe cough on my IBrowse...

Did your picasso run in Z2/Z3 autosence mode?

[zipper]

I think so - at least it's running on ZIII mode

[tonyw]

I found the story by Dave Haynie about the Busters.

tony

[PaSha]

Try throwing out the GVP I/Oxtender, I think it is also Z2/3 autosense. Anyway I had the same problem myself, throwing out the I/Oxtender cured it.