|
Register or have you forgotten your password?
|
|
|
| Amiga OS 4.x (future) Hardware Compatibility Discussions Discussion of hardware required for, and /or available for running Amiga OS 4.x and later versions. |
![]() |
|
|
Thread Tools | Display Modes |
|
|
#1 | ||||||||
|
Too much caffeine
![]()
|
It is possible to use eSATA Controler on PCI, for example http://cgi.ebay.pl/PCI-Controller-Ka...item5d2678f160 with Pegasos II and OS 4.1?
__________________
Amiga 2000 2 MB Chip ECS, Blizzard 2060/60 MHz 128 MB Fast, Picasso II+, Deneb USB, 160 GB & DVD-RW / OS 3.9 Amiga 1200, Blizzard PPC 233/040 256 MB Fast, BVision / OS4.0, OS3.9, MOS 1.45 |
||||||||
|
|
|
|
|
#2 | ||||||||
|
Cult Member
![]()
|
Hi, as far as I know OS4.1 supports very specific SATA controller chipsets, the drivers support Sillicon Image chipset -based controller cards... and this one you're referring to has a VIA VT6421 chipset, I'm not sure if that one is supported.
I'll probably be able to provide a better answer tonight when I get home or... you can look for OS4.1 supported hardware list, the supported SATA chipsets should be listed. Good luck, Dragster
__________________
Amiga 1200T 603/240, 060/50, SCSI II, Plextor 40/12/40S SCSI CDRW, Plextor 40X SCSI CDROM, Fujitsu 36GB 10KRPM SCSI HD, Pioneer 305S SCSI DVD, BVisionPPC, 256 MB FASTRAM, PowerFlyer EIDE, Scandex external scandoubler, ZIV busboard, Algor USB, Wireless, repulse audio...Peg II Quadruple boot: OS4.1/MorphOS 3.0 regged, OpenSUSE11.1 & Debian Squeeze, Powerbook G4 1139, A4000D CSPPC/PIV/DENEB, A4000T CSPPC/CVPPC/SCSI, etc.. 2 x 24 " FP241VW BenQ LCD monitors.
|
||||||||
|
|
|
![]() |
| Bookmarks |
| Tags |
| pegasos , esata , pci , controler |
| Thread Tools | |
| Display Modes | |
|
|