Register or have you forgotten your password?
|
|
Register or have you forgotten your password?
|
All times are GMT -6. The time now is 08:23 AM.
| Welcome to Forum, please register to access all of our features.
|
|
| Amiga Hardware Issues and discussion This forum is dedicated to the discussion and resolution of issues related to Classic and Next Generation Amiga hardware. Got a problem with a piece of hardware? Click to speak. |
 |
|
|
Thread Tools | Display Modes |
02-10-2010, 01:43 PM
|
#1 | ||||||||
|
Amiga Addict!
Join Date: Sep 2009
Location: IL, US
Posts: 342
|
Issue with GVP 040
I have a GVO 040 33mhz accelerator for the 2000 but can not get it to boot. All I get is a black screen, sometimes cycles into a second dark grey screen and stays there.
I have played around with the jumpers but no luck. any thoughts?
__________________
Amiga 2000, 030 55mhz, 26mb ram, Indivision ECS, Megachip Amiga 4000/060 Cyberstorm MKI Amiga 500+ 2mb chip ram |
||||||||
|
|
|
02-10-2010, 07:43 PM
|
#2 | ||||||||
|
Lifetime Member
Join Date: May 2006
Location: Melbourne, Oz
Posts: 1,525
|
Re: Issue with GVP 040
I'd set all the jumpers back to what they should be.
Have you had the card working before ? Your 2000 still boots without the card ? If so remove any drives and memory from the card and see if the 2000 boots from floppy. If it does fire up the GVP Install floppy and run the card test utility. Can't remember what it's called. Goodluck Gertsy Last edited by gertsy; 02-10-2010 at 07:45 PM.. |
||||||||
|
|
|
|
| Bookmarks |
| Tags |
| 040 , gvp , issue |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
