Register or have you forgotten your password?
|
|
Register or have you forgotten your password?
|
All times are GMT -6. The time now is 08:34 PM.
| Welcome to Forum, please register to access all of our features.
|
|
| Amiga Hardware Issues and discussion This forum is dedicated to the discussion and resolution of issues related to Classic and Next Generation Amiga hardware. Got a problem with a piece of hardware? Click to speak. |
 |
|
|
Thread Tools | Display Modes |
08-23-2009, 08:37 PM
|
#1 | ||||||||
|
Amiga 1000+AmigaOne X1000
|
advice soldering IDE connector on 1200
well I got my old defective through board IDE connector off cleanly on my 1200 but now I need some advice soldering the new connector to the MB as the pins are too bloody tight ..any ideas?
__________________
__________________________________________________ __________________ c64-dual sids, c128, A500,-A590, A1200-030@50 Indivision AGA & Catweasel MK4+= Amazing ! My Master Miggies-Amiga 1000 & AmigaOne X1000 ! --- www.amigaos.net --- -AspireOS.com & Amikit- Amiga for your netbook- ***X1000- I BELIEVE *** 
|
||||||||
|
|
|
08-24-2009, 12:47 AM
|
#2 | ||||||||
|
sad moaning faced git
Join Date: Jan 2008
Location: Virginia, USA
Posts: 3,191
|
Re: advice soldering IDE connector on 1200
Smaller-tipped iron?
__________________
3 Commodore file cabinets, 2 Commodore USB turntables, 1 AmigaWorld beer mug Alienware M14x i7 laptop running AmigaForever |
||||||||
|
|
|
|
08-24-2009, 01:29 AM
|
#3 | ||||||||
|
Cult Member
Join Date: Feb 2002
Location: Dublin, Ireland
Posts: 880
|
Re: advice soldering IDE connector on 1200
Yeah, don't even bother trying unless you've a needlepoint tip on your iron. Also, use the thinnest solder you can find, and apart from that there aren't any special techniques or anything - it's pretty simple.
|
||||||||
|
|
|
|
08-24-2009, 01:41 AM
|
#4 | ||||||||
|
Cult Member
|
Re: advice soldering IDE connector on 1200
To handle such delicate things, you need the right tool. It may be expensive but it's better.
Check it. Solder Iron With Blower
__________________
Good day to all Amigans! MARGE - P3 DellOptiplex 220; 225 MB; Dual Partitioned WinXpSP3 and IcarosDesktopv1.4.x MANNY - A1200 + CobraDKB '030 w/ 32MB + DataFlyer HDD ASPIREOne D270 + Sata SSD 512GB - Hosted AROSAspireone but it is very slow. |
||||||||
|
|
|
|
08-24-2009, 07:29 AM
|
#5 | ||||||||
|
Cult Member
Join Date: Mar 2004
Posts: 941
|
Re: advice soldering IDE connector on 1200
servisol soldamop to clean up the PCB contacts and use solder paste.
__________________
------------- power is nothing without control |
||||||||
|
|
|
|
| Bookmarks |
| Tags |
| advice , soldering , ide , connector , 1200 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
