|
Register or have you forgotten your password?
|
|
|
| Amiga Hardware Issues and discussion This forum is dedicated to the discussion and resolution of issues related to Classic and Next Generation Amiga hardware. Got a problem with a piece of hardware? Click to speak. |
![]() |
|
|
Thread Tools | Display Modes |
|
|
#1 | ||||||||
|
Beginner
![]()
Join Date: Feb 2009
Posts: 23
|
ive installed a s3virge gfx card in the mediator LT4
the pciinfo amidos comand reports evythin ok the problem im havin is geting the picasso96mode in prefs to see any boards (atach settings to no boards) ive been through the installs number of times and still no boards.?? ive managed to crash it when clicking on monitor in devs .ive read another post were user was havin same problem only with a voodoo card and seams to have cured it by missing step 3 in the mediator cd instructions (copy driver to picasso96 libs) wich is totaly confusing to me """this is what i read"" All works now and the Voodoo Card has been recognized by my Amiga. The point is that step 3) of Elbox Voodoo and Picasso96 Installation document needs to be skipped!!! Please install the Picasso96 graphic system following its documentation. Choose Cybervison 64 3D as the graphic card. After the Picasso96 installation, please start Picasso96 installation once again and choose the "Update an installed version". Select only "Monitorsettings" and choose the frequency supported by your monitor. After successful installation you need to: 1. Find the CVision3D and CVision3D.info in the DEVS:Monitors drawer, rename these files to Voodoo and Voodoo.info, respectively. 2. Change in the tool type window of Voodoo.icon: BOARDTYPE = from CVision3D to Voodoo. 3. Copy the enclosed Voodoo.card driver to the Libs:Picasso96 drawer. 4. Click to the Voodoo icon (in Devs:Monitors drawer). 5. Start the Picasso96Mode program (in SYS:Prefs drawer) and select Attach setting to Board0: Voodoo. Exit Picasso96Mode by SAVE. ive followed all instructions on mediator cd! does any one know the easy way to get it workin?? im usin workbench 3.0 and 3.0 roms with other progs in the meantime im trying new install in other partishion dh1: and tri that? :-?
|
||||||||
|
|
|
|
|
#2 | ||||||||
|
Beginner
![]()
Join Date: Feb 2009
Posts: 23
|
no need to respond i sorted it with a voodoo3 the s3 i had probly isnt compatible
|
||||||||
|
|
|
|
|
#3 | ||||||||
|
Cult Member
![]()
Join Date: Dec 2005
Posts: 507
|
http://groups.yahoo.com/group/Amiga-Mediator/ Don't know if you are aware of this. Might be useful for any problems in the future. |
||||||||
|
|
|
![]() |
| Bookmarks |
| Tags |
| setup , 1200 , tower , pci , lt4 , gfx , elbox , carnt , busboard |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Amiga 1200 TOWER + BUSBOARD + BLIZZ PPC on Ebay !!! | yeffa | Amiga Marketplace | 0 | 09-10-2007 11:38 AM |
| Floppy power connector on ELBOX WinnerZIV busboard... | keropi | Amiga Hardware Issues and discussion | 14 | 07-21-2006 06:15 AM |
| WTB: Elbox ZIV busboard + Mediator ZIV | keropi | Amiga Marketplace | 6 | 06-22-2006 02:54 PM |
| OnBoard 1200 Ex V2.0 busboard for A1200 in RBM tower !! | Effy | Amiga Marketplace | 2 | 06-11-2005 01:02 PM |
| Wanted: Amiga 1200 Tower case plus Zorro 3 Busboard | AF-Domains.net | Amiga Hardware Issues and discussion | 0 | 01-10-2004 04:11 PM |