|
Register or have you forgotten your password?
|
|
|
| Amiga Hardware Issues and discussion This forum is dedicated to the discussion and resolution of issues related to Classic and Next Generation Amiga hardware. Got a problem with a piece of hardware? Click to speak. |
![]() |
|
|
Thread Tools | Display Modes |
|
|
#1 | ||||||||
|
Too much caffeine
![]()
Join Date: Apr 2008
Posts: 72
|
Hi, Ive had a GVP A500-HD8+ for a while now, the first time I tested it my A500 would display a dark grey screen when it was connected, whether it was on or off. I bought a new hard drive, and upgraded the ROM from 4.13 to 4.15 and had no change. So finally I cleaned the contact pins on the A500's expansion port. Now booting the Amiga with it turned off causes it to display a black screen, and when it's on it displays the 'please isert' WorkBench disk screen, whether it's set to Autboot or not. I've tried it with and without RAM with the correct jumper configurations and with both hard drives, one which I'm sure has WB 1.3 installed and it's the same with both. Can some one please tell me there's some silly little thing I've missed? :-D
|
||||||||
|
|
|
|
|
#2 | ||||||||
|
Defender of the Faith
![]()
|
erm... the drive has an amiga partition on it that is set to be bootable? :-?
__________________
500 030@40 4GB 8/2MB OS3.1 IndiECS acardscsi2ide clockport 600 030@25 4GB 32/2MB OS3.9 IndiECS Subway 10MbNIC 1200 030@50 4GB 144/2MB OS3.9 IndiAGA2 Subway 4xIDE 10MbNIC 1200 040@40 4GB 128/2MB OS3.9 IndiAGA2 FastATA WifiNIC 1200 603@200 60GB 128/2MB OS3.9 BVision Subway 100MbNIC 3000 060@50 4GB 383/2MB OS3.9 IndiECS CV64/3D scsi2ide ZorRam kickflash ariadneII 4000 040@25 60GB 272/2MB OS3.9 IndiAGA2 4xIDE BigRam Mediator CD32 020@14 0/2MB OS3.1 IndiAGA2 |
||||||||
|
|
|
|
|
#3 | ||||||||
|
Too much caffeine
![]()
Join Date: Apr 2008
Posts: 72
|
I'm pretty sure it does, the drive came 'ready to go', can you tell me how to check? :-)
|
||||||||
|
|
|
|
|
#5 | ||||||||
|
Too much caffeine
![]()
Join Date: Apr 2008
Posts: 72
|
1.3
|
||||||||
|
|
|
|
|
#6 | ||||||||
|
Desperately needs a life
![]()
|
Could the SCSI ID of the new hard drive and the SCSI ID of the host controller be the same?
|
||||||||
|
|
|
|
|
#7 | ||||||||
|
Too much caffeine
![]()
Join Date: Oct 2008
Posts: 98
|
I have 2 of these controllers.. Just bought my second one for $40.00us on Ebay. They are a great device..
Heres what you do: 1.) Make sure the hardisk is set to ID 0 and termianted properly. 2.)Run the FaaastPrep program from the GVP install disk. 3.)Select "Manual" 4.)If it's talking to the drive, it should now show the configuration settings for the drive... Make sure it's set to "BOOT". Also, make sure the BootPri: is set to some reasonable value (like 1). If not, change it so that it is, and select "write".. This will write the config back to the RDB of the drive.. If you need the Install Disk, I can send you a .dms of it. Also, I have the manual. If you cant find it on the web, I could scan it and upload it somewhere.. 5.)Reboot and try again. |
||||||||
|
|
|
|
|
#8 | ||||||||
|
Too much caffeine
![]()
Join Date: Apr 2008
Posts: 72
|
Could be, if you can tell me how to check I'd be happy to :-D
|
||||||||
|
|
|
|
|
#9 | ||||||||
|
Too much caffeine
![]()
Join Date: Apr 2008
Posts: 72
|
@Metalguy66
Thanks for the info, it'll probably take my a while to do all that so it'll have to wait 'till tomorow. I've got a copy of the install disk, thanks for offering :-D |
||||||||
|
|
|
|
|
#10 | ||||||||
|
Too much caffeine
![]()
Join Date: Apr 2008
Posts: 72
|
Well I've had a minor break through. I probably should have mentioned I haven't been able to get the HD light to turn on, whoops :roll: but today I removed the SCSI ribbon cable and switched it around, and now it lights up! but unfortunately it hasn't fixed the problem, as now the Amiga grey screens whenever the hard drive's attached. I don't know what else to try :-?
|
||||||||
|
|
|
|
|
#11 | ||||||||
|
Too much caffeine
![]()
Join Date: Oct 2008
Posts: 98
|
Is the switch connected and set to "autoboot"?
|
||||||||
|
|
|
|
|
#12 | ||||||||
|
Cult Member
![]()
Join Date: Feb 2006
Location: Melbourne, Australia
Posts: 723
|
i do not know about your other problems, but Kickstart 1.3 was NEVER Autoboot.
It was not until the Kickstart 2.04+ that the file system was moved from disk, to ROM. |
||||||||
|
|
|
|
|
#13 | ||||||||
|
Desperately needs a life
![]()
|
The HD+8 have its own ROM to boot from... as all other devices of that era. :roll:
__________________
Goodbye people. I'll pop on from time to time, RL is acting up. |
||||||||
|
|
|
![]() |
| Bookmarks |
| Tags |
| hd8 , thread |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| The OS4 direction thread | Matt_H | General chat about Amiga topics | 7 | 07-22-2007 03:10 PM |
| The What If thread | Bug_racer | Amiga community support ideas | 6 | 02-02-2007 04:06 AM |
| New Thread. | machinehead | CH / Philosophy and Religion | 1 | 06-23-2006 07:46 AM |
| Yet Another Pirate Thread | Coolit | Amiga Software Issues and Discussion | 5 | 09-03-2005 05:34 PM |
| Pegasos review thread volume II (The on topic thread) | redrumloa | Amiga Hardware Issues and discussion | 124 | 05-08-2003 05:09 AM |