Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: SCSI on a CSA 1250 with Kick 3.0 / 3.1  (Read 712 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline AmiDreamerTopic starter

  • Newbie
  • *
  • Join Date: Dec 2007
  • Posts: 6
    • Show only replies by AmiDreamer
SCSI on a CSA 1250 with Kick 3.0 / 3.1
« on: November 09, 2008, 05:51:37 PM »
Hello!
I wan´t buy the CSA 1250 to build a worker-A1200 with external
SCSI-tower.
Thy guy, who sells the card, says: the scsi-controller
on the 1250works ONLY with kick 3.0!!!
Is this right? Gives anywhere a softwarepatch or a new
scsi-chip (higher version) for this card, so that i can work
with kick 3.1?
3.0  is not bad, but i work almost with the newest stuff on my amigas.
PS:
I do my very best, but only 5 years schoolenglish
23 years ago,    :-o
AmiDreamer251
Logged
 

Offline Robert17

  • Hero Member
  • *****
  • Join Date: Apr 2004
  • Posts: 1011
    • Show only replies by Robert17
Re: SCSI on a CSA 1250 with Kick 3.0 / 3.1
« Reply #1 on: November 09, 2008, 07:45:49 PM »
The Big book of Amiga hardware doesn't say it won't work with Kickstart 3.1, so I see no reason why it shouldn't.

What happens when he tries to use it with Kickstart 3.1?

Robert
Logged
Member of the Lincs Amiga Group, UK :-)
 

Offline Computolio

  • Jr. Member
  • **
  • Join Date: Apr 2004
  • Posts: 90
    • Show only replies by Computolio
Re: SCSI on a CSA 1250 with Kick 3.0 / 3.1
« Reply #2 on: November 09, 2008, 07:49:42 PM »
   I had this card and he is correct- the SCSI doesn't work with Kickstart 3.1. There is no known workaround at this time.

   There's evidence that drivers once existed for the SCSI, but they would be on the accelerator's install disk, which has yet to turn up.
Logged
 

Offline AmiDreamerTopic starter

  • Newbie
  • *
  • Join Date: Dec 2007
  • Posts: 6
    • Show only replies by AmiDreamer
Re: SCSI on a CSA 1250 with Kick 3.0 / 3.1
« Reply #3 on: November 10, 2008, 09:21:37 AM »
I don´t know, what happens. I think it won´t work
with kick 3.1! That´s all.
So i must search for an installdisk. In amiga.resource.cx
is an binary-file. When the card comes, i try to make
it work with kick 3.1 with the binary file. Or i
try to hasndle with the scsi-devices from other cars. From software it can´t be broken,  :-D
Logged
 

Offline Computolio

  • Jr. Member
  • **
  • Join Date: Apr 2004
  • Posts: 90
    • Show only replies by Computolio
Re: SCSI on a CSA 1250 with Kick 3.0 / 3.1
« Reply #4 on: November 11, 2008, 07:49:30 AM »

    That's just a dump I made of the existing firmware.
Logged
 
Pages: [1]   Go Up
« previous next »