»

[Darrin]

It was mentioned in a past thread that there was a conflict with the Deneb USB card and the Cybervision 643D RTG card. Chris mentioned at that time that work was in progress on an update for the Deneb to work around the bug in the CV643D.

I noticed that the update for the Deneb was on their website so I flashed my card with the new file v9, updated Poseidon to v4.1 and Luciferin. I installed the CV643D card, installed CybergraphX 4 rebooted and then selected a nice big RTG screenmode!

Cheers guys, it works great. Thanks. :-D

Now I can finally screw the lid back on my A4000 as there's no more room to add anything!

One general question for any Deneb users out there. Before the update of the Poseidon software to v4.1 and after I still can't get the USB stack to run on start-up. I have to run Trident, click "restart" to get attached devices regognised, but the "SAVE" button is greyed out. Anyone know how I can save my prefes so the USB stack is running on start-up? I've never had this problem before.

[MozzerFan]

Anyone know how I can save my prefes so the USB stack is running on start-up? I've never had this problem before.

There is a "save"-option under the settings menu of poseidon.

Regards,
Lloyd

[Darrin]

MozzerFan wrote:
There is a "save"-option under the settings menu of poseidon.

Regards,
Lloyd

Unfortunately, it is greyed out so I can't click on it. All I can do is click the "USE" button next to it.

[MozzerFan]

I don't mean the buttons. If you right click your mouse a menu should appear (just like the workbench menu).
Then you goto settings and select save.

Regards,
Lloyd

[Darrin]

OK, did that, rebooted and still the stack is down until I manually start it. Very strange.

[MozzerFan]

Is poseidon in the flashrom, or do you start it in startup-sequence or user-startup?

Regards,
Lloyd

[Darrin]

MozzerFan wrote:
Is poseidon in the flashrom, or do you start it in startup-sequence or user-startup?

Regards,
Lloyd

It is in the user startup, and I also clicked on PsdROMtag in the Tools draw which to make it reset resident.

All I've done to the Deneb Flash ROM is remove the Eric Scwartz (sorry Eric about the spelling!) demo. The flash ROM still contains:

Deneb Intro
Denebpiousb.device
Denebz2usb.device
massstorage.class
poseidon.library
hub.class
hid.class
psdstackloader

I get the Deneb intro on startup. I've never had this problem before. I wonder what I did different when I initially set it up.

[keropi]

where is the new DENEB flash???

[keropi]

where is the new DENEB flash???

[Darrin]

Also of note is that I can't get the 3 controllers active at the same time in Trident. If I deactiveate the mausb controller then I can start the piousb controller.

I think it's time to wipe the boot drive and start again...

[Darrin]

keropi wrote:
where is the new DENEB flash???

Here you go:

http://www.e3b.de/usb/index_e.html

click on "SUPPORT" on teh left and then "UPDATES" top center. there's two updates v8 and v9. It looks like v9 is for Zorro 3 use only while v8 is Z2/Z3 (could be wrong).

Make sure you follow the instructions included in the download step by step.

[MozzerFan]

All I've done to the Deneb Flash ROM is remove the Eric Scwartz (sorry Eric about the spelling!) demo. The flash ROM still contains:...psdstackloader

There you go. If you save your settings, the settings are saved to ENVARCsdstackloader. There is an old version of it on the flashrom, so you either put the new one in the flashrom, or remove the old version from the flashrom.

Regards,
Lloyd

[MozzerFan]

Also of note is that I can't get the 3 controllers active at the same time in Trident. If I deactiveate the mausb controller then I can start the piousb controller.

Well, there can only be 1 driver active. Either the dma driver or the pio driver (or if you have a Z2 system the z2-driver).

Regards,
Lloyd

[MozzerFan]

Darrin, forgot to mention, that if you keep the poseidon files in your flashrom, you can remove psdstackloader from user-startup.

Regards,
Lloyd

[Darrin]

MozzerFan wrote:
Darrin, forgot to mention, that if you keep the poseidon files in your flashrom, you can remove psdstackloader from user-startup.

Regards,
Lloyd

Ah, so my FlashROM is setting the preferences which is why I can't save the changes from the Workbench preferences! Doh!!! OK, thanks for that tip. I'll clear the FlashROM completely for now and see if that does the trick.

I just wiped my boot partition to start again, but I backed up the old one before I started.

Cheers.