»

[McVenco]

Today I received my CSMK3 (thanks BinoX!), but before installing I'd like to double check everything for fear of instantly destroying something :-) I'd like to be sure of the following:

- Are the v3.1 install disks the latest version?
- Besides these disks, do I need to install anything else?
- The EXT/INT jumper on the A4000D mainboard needs to be set to EXT, right?
- Which ID does the onboard SCSI controller have?
- The SCSI chain needs to have active terminators on both ends, right?

For the record: my system is a towerised A4000D with KS3.1/OS3.9 and a PicassoIV.

Can't wait to have this baby installed when I get home after work. I never had an 060 Amiga before so I'm in for a treat :-D

[zipper]

http://phase5.a1k.org/ has the latest software.

[alexh]

And the Manuals

http://phase5.a1k.org/files/csmk3.pdf

[keropi]

EXT is correct, you can change/view the scsi ID by holding ESC during boot to enter the cs-MKIII menu...
you need 2 ACTIVE 68pin terminators, and before you can use it you need to have the 060 libs in LIBS: , otherwise u will get a bunch of gurus and crash...!
enjoy it , the fastest 060 card for the A4000D :-D :-D

[McVenco]

keropi wrote:

and before you can use it you need to have the 060 libs in LIBS: , otherwise u will get a bunch of gurus and crash...!

Are the libs on the 2 install disks also the latest revision, or do I need to copy those separately from abovementioned support site? And which files on there do I need?

[Jope]

http://phase5.a1k.org/files/040_060Libs.zip

Just put those in libs: overwriting the old 040 lib, then install the new cpu card. Nothing else needed for basic operation.

[keropi]

no get the package from a1k.org ...

Systemlibrarys for 68040/68060 Systems
or download as ZIP (128KB)
This is what you need...

:-D :-D :-D