»

[Xand]

Hello,
I'm having difficulty getting Warp3D to work with my VooDoo3 3000. Could someone give me a rundown on setting this up?
I've got P96 running properly.
WarpOS is running properly (that was an interesting task).
I Installed the Warp3D that comes on the MMCD and tried setting the "gfxaddress" and "force" settings, but to no avail.
I REALLY would like to be able to at least try the Freepsace demo - maybe even get the game someday....
Any help would be greatly appreciated.

[Rogue]

Do you use the MMU or non-MMU version of the Mediator driver? What happens if you are trying the demos?

[lempkee]

you can just forget your MMU when you have an a1200 + ppc + mediaor , so you will only have half of the rtg mem compared to in 68k mode.
for me it was 8mb.

i can send u all my settings but i think the best is if you learned this by dooing all the steps 1 by 1.

ppsayback w3d was the first game i got running with w3d in wos mode...quake was the last one.., anyway all works superb here now .

[lempkee]

xand: why was warpos an interesting task???? , wasnt it just 1. flash the rom of your bppc , 2. install mediator/bppc. finnished?

cheers

[Sloxa]

yes!!! are you sure, at you have correct
warp3d?? becouse in my mediatormmcd
are only warp3d version to prometheus card.
there most be avenger named library
in you libs/warp3d or something...
:-D

[Xand]

@Rogue
Non-MMU.
For Freespace, I get a gray screen and lockup.
For Shogo, I get a gray screen and a shell on the Workbench with multiple error messages about being unable to lock the screen.
For the Warp3D test, I get the blue screen and I can change the settings, but no 3D whats-it.

@lempkee
Welllllllll, I bought my Blizzard second hand and had no manuals or instructions. The Mediator of course was new. It was interesting in that I had to research quite a bit on the internet before I found everything.
I'll go through the Warp3D stuff again..

@Sloxa
I have several files with "Avenger" in the name in my Warp3D directory...

The games work with the software renderer, but they're WAAAAAAAAAAY too slow.

[DeQuevedo]

Hi

Rogue! Nice avatar!

I have almost the same setup as you, and the same trouble with W3D as you.

What´re the settings I have to configure it the WOS preferences? the gfx address? any concrete HEX address? terminator 1, 2,?

I think I have it running AMIAMP is running via WOS, and the warpdatatypes.

The W3D. When I run the full screen of the demos 68k and ppc are running, the window ones doesn´t.

The other demos, these with the texture with blending options and so, ir running butta I doesn´t see the texture!

If I try the PayBack demo I get grey screen.

Please help!

PS: Forgive my bad english. At this exactly moment I have been up to 40 hours withuot sleeping, getting ready for my final examination tomorrow "Radiation of digital signals via air" sigh! :-o

[lempkee]

to all in here who have probs with p96/w3d/wos on a voodoo3 , just email me privately and i will send you the complete settings files.

(the correct env's) because i just tried to post here (text) and found out its better to just email a small and tiny lzx with all what u need.

cheers


pps:quake2,shogo,freespace,payback,blitzquake etc all works on my setup with the vodoo3.
and pup emu etc

(the people who helped me was the guys from hyperion (timothy and steffenH. etc) a long while back + the mediator group did also alot for me ...

[PulsatingQuasar]

Sorry to bump such an old thread but I have added a Mediator SX to my BlizzardPPC setup and get the same behaviour the person here is getting.

Are you still able to E-mail those files lempkee? I would like to have a look.


Also, I'm a bit dissapointed so far with the solid window moving speed. The Grex/Voodoo3/CyberGraphx combination does this waaaaaaay faster.

[kas1e]

hi 2 all.

das anyone know, why i can't use 68k and ppc warp3d together ? I mean if i want to use ppc/wos/w3d, i set in env:mediator/MMU - No, but in this case 68k warp3d can't work. And if i set MMU in Yes, 68k warp 3d working, but ppc warp3d can't work

So, i need change MMU,reboot,etc - so hard. Maybe here is the way for easy 'on the fly' MMU setting (without reboot), or maybe need some more preferens somewhere ?

[lorddef]

Well I just managed to get warp3d working with p96/voodoo3/68060 and so far it seems to need a little tune-up.

First of all nothing will run windowed, and if I run payback in "hardware rendering mode" it's really slow. In "software rendering" its quite fast but looks ass.


Any ideas peeps?

[Framiga]

If I try the PayBack demo I get grey screen.

another enviroment (CVPPC) but same result if a set the RAM waistates to OFF.

Now with the RAM option sets to 60ns, PaybackDemo works on W3D.

[gonzoninja]

Have you installed the right drivers from the MMCD? The automatic script on the CD usually copies across the WRONG drivers (i.e. the A3000/A4000 for the A1200 and vice versa)

use MediatorX or something to check you have the right drivers and then copy across the correct ones.