|
Register or have you forgotten your password?
|
|
|
| Amiga Hardware Issues and discussion This forum is dedicated to the discussion and resolution of issues related to Classic and Next Generation Amiga hardware. Got a problem with a piece of hardware? Click to speak. |
![]() |
|
|
Thread Tools | Display Modes |
|
|
#1 | ||||||||
|
Merely Curious
![]()
|
hi. i have never opened an amiga in my life where does the hard drive go i have just bought a 1.4 gig one to fit in my a1200 but havnt a clue where to put it any help out there be much obliged thanks alex :-x ;-)
|
||||||||
|
|
|
|
|
#2 | ||||||||
|
Defender of the Faith
![]()
Join Date: Feb 2002
Location: Nottingham, UK
Posts: 1,153
|
Hi, you need to carefully open it up and look to see if you have the hard drive cradle fitted. I assume you have got a 2.5" drive ?? You then need a short cable to fit it to the IDE header.
__________________
Let X = X {(c) Laurie Anderson} |
||||||||
|
|
|
|
|
#3 | ||||||||
|
Technoid
![]()
|
The space for a 2.5" HD is to the top left with a 2.5" cable connector.
There isn't much space for a 3.5" drive, a towered A1200 would be better. You will need to add a power splitter from the floppy power to power the 3.5" drive as no power header is available for 3.5" is provided. If you have WB 3.0 or 3.1, do not use any more than 4GB unless you use SFS or PFS to enable disk space beyond the 32bit limit otherwise you need Workbench 3.5 or 3.9. |
||||||||
|
|
|
|
|
#4 | |||||||||
|
Merely Curious
![]()
|
hi. thanks what does a 21/2 inch drive look like\?????? where is it.. from numpty Quote:
|
|||||||||
|
|
|
|
|
#5 | ||||||||
|
Merely Curious
![]()
|
hi. it is a 21/2 inch drive it says it on it. i will take alook there is a thing that has 2 more pins than the 21/2 inch connsctor cable???? |
||||||||
|
|
|
|
|
#6 | ||||||||
|
Defender of the Faith
![]()
Join Date: Feb 2002
Location: Nottingham, UK
Posts: 1,153
|
There are indeed normally a couple of unused pins at one end of the 'dual in line' pins on a 2.5" drive. You must make sure you get the cable in the correct orientation as the 5V is also fed through the cable (while a 3.5" drive has a seperate 'Molex' connector for power).
Do you have a drive preformatted with AmigaOS or do you have the HD install disks ready ? Can you see a cradle to fit the hard drive inside the A1200 ? Good luck :-)
__________________
Let X = X {(c) Laurie Anderson} |
||||||||
|
|
|
|
|
#7 | ||||||||
|
Merely Curious
![]()
|
hi. its pre formatted with os 3.1
thanks alex |
||||||||
|
|
|
|
|
#8 | ||||||||
|
Defender of the Faith
![]()
Join Date: Jan 2007
Posts: 1,062
|
Try here my friend ...
http://www.cdv.co.nz/support/amiga/001/ Thats a step-by-step tutorial first posted 24/01/2007 by 'InTheSand' :-D
__________________
To err is human ... to BOING divine! |
||||||||
|
|
|
|
|
#9 | ||||||||
|
Merely Curious
![]()
|
hi. thanks for that much appreciated alex |
||||||||
|
|
|
|
|
#10 | ||||||||
|
Defender of the Faith
![]()
Join Date: Feb 2002
Location: Nottingham, UK
Posts: 1,153
|
Wow, that guide sure seems to answer the rest of the questions you were going to ask
Let us know if it works for you :-)
__________________
Let X = X {(c) Laurie Anderson} |
||||||||
|
|
|
![]() |
| Bookmarks |
| Tags |
| a1200 , installing , hard , drive |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Installing hard drive on Amiga 500 | Everblue | Amiga Hardware Issues and discussion | 6 | 09-02-2007 02:00 AM |
| HELP on installing OS 3.9 on Large Hard Drive!!!! | amigagreek | Amiga Software Issues and Discussion | 9 | 04-22-2007 12:49 PM |
| Installing Hard Drive in A1200 | moominpapa | Amiga Hardware Issues and discussion | 4 | 03-31-2006 03:23 PM |
| Installing a hard drive in A1200 | justmehant | Amiga Hardware Issues and discussion | 1 | 09-06-2004 09:12 AM |
| Installing a hard drive | Milo | Amiga Hardware Issues and discussion | 5 | 06-19-2003 08:52 AM |