|
Register or have you forgotten your password?
|
|
|
| Amiga Hardware Issues and discussion This forum is dedicated to the discussion and resolution of issues related to Classic and Next Generation Amiga hardware. Got a problem with a piece of hardware? Click to speak. |
![]() |
|
|
Thread Tools | Display Modes |
|
|
#1 | ||||||||
|
Technoid
![]()
Join Date: Mar 2006
Posts: 167
|
Got a GVP 040 card for my towered 1200 but the fan has come unstuck of the CPU.With what or how do I stick it back on as its plastic?It's still working but just flopping around on the end of it's power cable!
__________________
Amiga1200 Power Tower GVP 040 PowerFlyerFast ATA CDRewriter 3 HDDs - Amiga500GVP-HD50meg,Amiga500+GVP-HD100meg,Amiga500+1.3/3.1,Amiga600,Amiga600HDAmiga1200HD4gig SCSI SquirrelCDRom,Amiga2000,Amiga2000HD,Amiga4000D,CD3 2 |
||||||||
|
|
|
|
|
#2 | ||||||||
|
Defender of the Faith
![]()
|
GVP '040 card? :-?
Says in your sig. you have a Blizzard 1240 |
||||||||
|
|
|
|
|
#3 | ||||||||
|
Premium Member
Join Date: Nov 2005
Posts: 8,666
|
Surely the principle would be the same whichever card he's using :-)
Is the fan on a heatsink? If so then you could use some thermal glue which will adhere the heatsink to the CPU and hold it in place, while also assisting with conducting the heat away from the chip. If it's just a fan and there are no mountings for the fan on the board, then you might have to carefully cable-tie it to the board. I can't think of any other way. -- moto
__________________
Code:
10 IT'S THE FINAL COUNTDOWN 20 FOR C = 1 TO 2 30 DA-NA-NAAAA-NAAAA DA-NA-NA-NA-NAAAA 40 DA-NA-NAAAA-NAAAA DA-NA-NA-NA-NA-NA-NAAAAA 50 NEXT C 60 NA-NA-NAAAA 70 NA-NA NA-NA-NA-NA-NAAAA NAAA-NAAAAAAAAAAA 80 GOTO 10 |
||||||||
|
|
|
|
|
#4 | ||||||||
|
Technoid
![]()
Join Date: Mar 2006
Posts: 167
|
OOPS changed my signature! No it's just the basic black plastic fan.It was origionally held on with some sort of GLUE?There is nowhere to screw or mount it to on the card.Would a heatsink with the fan screwed to that be a better idea?Would thermal paste be enough to hold the heatsink in place or does that not set hard?
__________________
Amiga1200 Power Tower GVP 040 PowerFlyerFast ATA CDRewriter 3 HDDs - Amiga500GVP-HD50meg,Amiga500+GVP-HD100meg,Amiga500+1.3/3.1,Amiga600,Amiga600HDAmiga1200HD4gig SCSI SquirrelCDRom,Amiga2000,Amiga2000HD,Amiga4000D,CD3 2 |
||||||||
|
|
|
|
|
#5 | ||||||||
|
Desperately needs a life
![]()
|
If the card do not have holes to secure the fan, obviously they have not holes to secure a cooler. :roll:
Buy a cooler WITH THERMAL GLUE. There are some kits around with some heatsinks ready to glue everywhere, look for it.
__________________
Goodbye people. I'll pop on from time to time, RL is acting up. |
||||||||
|
|
|
|
|
#6 | ||||||||
|
Technoid
![]()
Join Date: Mar 2006
Posts: 167
|
When you say thermal glue do you mean the same as thermal paste? or thermal compound?
__________________
Amiga1200 Power Tower GVP 040 PowerFlyerFast ATA CDRewriter 3 HDDs - Amiga500GVP-HD50meg,Amiga500+GVP-HD100meg,Amiga500+1.3/3.1,Amiga600,Amiga600HDAmiga1200HD4gig SCSI SquirrelCDRom,Amiga2000,Amiga2000HD,Amiga4000D,CD3 2 |
||||||||
|
|
|
|
|
#7 | ||||||||
|
Technoid
![]()
Join Date: Jan 2005
Location: Lowestoft, Suffolk, UK
Posts: 464
|
Super Glue will be just fine. It does not suffer from heat problems, see my website, www.amiga600.net for info on how I used it to attach some heatsinks to an Apollo 030.
__________________
Visit my new blog at www.amiga600.net |
||||||||
|
|
|
|
|
#8 | ||||||||
|
Technoid
![]()
Join Date: Mar 2006
Posts: 167
|
@1200
Cannot connect to website!Was wondering if I could get away with using superglue?I guess I was hoping someone else had used it successfully before I tried it.
__________________
Amiga1200 Power Tower GVP 040 PowerFlyerFast ATA CDRewriter 3 HDDs - Amiga500GVP-HD50meg,Amiga500+GVP-HD100meg,Amiga500+1.3/3.1,Amiga600,Amiga600HDAmiga1200HD4gig SCSI SquirrelCDRom,Amiga2000,Amiga2000HD,Amiga4000D,CD3 2 |
||||||||
|
|
|
|
|
#9 | ||||||||
|
Technoid
![]()
Join Date: Jan 2005
Location: Lowestoft, Suffolk, UK
Posts: 464
|
@ MickTheLip
Try now, something had crashed. I think Christian used superglue in his project too see: www.amiga600.de Thanks!
__________________
Visit my new blog at www.amiga600.net |
||||||||
|
|
|
|
|
#10 | |
|
Guest
Posts: n/a
|
Quote:
The best stuff to hold your fan in place without causing a catastrophy is 24 hour epoxy. It is the same stuff used by Commodore in virtually all the power supplies made for the Commodore 64 because it is a high quality electrical isolator. 5 minutes epoxy might do the job too but only 24 hour epoxy is garanteed to be safe with electronics because of its electrical isolation properties. |
|
|
![]() |
| Bookmarks |
| Tags |
| cpu , cards , adrift , gvp040 , fan |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| PCI cards og Zorro cards. What is best ? | Palm | Amiga Hardware Issues and discussion | 13 | 11-30-2008 02:28 PM |
| What are these cards????? | Generale | Amiga Marketplace | 22 | 04-18-2005 03:23 PM |
| Zorro cards vs PCI cards | mpiva | Amiga Hardware Issues and discussion | 9 | 09-01-2004 12:30 PM |
| PPC cards, RTG cards, A4000's, SX-1's, ten a penny on eBay! | StevenJGore | Amiga Marketplace | 25 | 04-12-2004 05:23 AM |
| GFX cards | melott | Amiga Hardware Issues and discussion | 17 | 06-08-2003 12:26 PM |