|
Register or have you forgotten your password?
|
|
|
| Amiga Hardware Issues and discussion This forum is dedicated to the discussion and resolution of issues related to Classic and Next Generation Amiga hardware. Got a problem with a piece of hardware? Click to speak. |
![]() |
|
|
Thread Tools | Display Modes |
|
|
#1 | ||||||||
|
Premium Member
Join Date: Nov 2005
Posts: 8,666
|
My A4000 is really cramped, and between the drives and the PSU there's a mass of crushed cables. I'd like to replace the PSU with a physically smaller one. I'm thinking of opening up the metal casing of the existing PSU and gutting it, then removing the front of it, which will mean I can tuck wires inside it. I'll then build a smaller PSU inside the casing.
Has anyone attempted anything like this who could offer me any advice? Like adapting an ATX PSU to work with the A4000 and doing the case modifications. -- moto
__________________
Code:
10 IT'S THE FINAL COUNTDOWN 20 FOR C = 1 TO 2 30 DA-NA-NAAAA-NAAAA DA-NA-NA-NA-NAAAA 40 DA-NA-NAAAA-NAAAA DA-NA-NA-NA-NA-NA-NAAAAA 50 NEXT C 60 NA-NA-NAAAA 70 NA-NA NA-NA-NA-NA-NAAAA NAAA-NAAAAAAAAAAA 80 GOTO 10 |
||||||||
|
|
|
|
|
#2 | ||||||||
|
Kindred of Babble-on
![]()
Join Date: Jul 2006
Location: Tallahassee, FL
Posts: 2,105
|
AmigaKit sells an ATX PSU adapter. I bought a micro ATX power supply to pair with it, and voila. Better power, less heat, and more space.
|
||||||||
|
|
|
|
|
#3 | ||||||||
|
Kindred of Babble-on
![]()
Join Date: Sep 2004
Location: Ioannina , Greece
Posts: 2,466
|
BEWARE!!!
BEWARE!!! BEWARE!!! remember my posts about amiga crashing? guess what! 90% of mATX psu's CANNOT DELIVER sufficient +5v current, so amigas crash. only mATX fit on the 4000D case , so BEWARE. don't get fooled with watt ratings, they are totally crap. I have tried 250/300/350W mATX psu's with NO success. ...and in the end I still use the normal 4000D psu... if you find a good psu, look HERE for some modding ideas! |
||||||||
|
|
|
|
|
#4 | ||||||||
|
Premium Member
Join Date: Nov 2005
Posts: 8,666
|
Cheers! Did you mount your uATX PSU in the case?
-- moto
__________________
Code:
10 IT'S THE FINAL COUNTDOWN 20 FOR C = 1 TO 2 30 DA-NA-NAAAA-NAAAA DA-NA-NA-NA-NAAAA 40 DA-NA-NAAAA-NAAAA DA-NA-NA-NA-NA-NA-NAAAAA 50 NEXT C 60 NA-NA-NAAAA 70 NA-NA NA-NA-NA-NA-NAAAA NAAA-NAAAAAAAAAAA 80 GOTO 10 |
||||||||
|
|
|
|
|
#5 | ||||||||
|
Premium Member
Join Date: Nov 2005
Posts: 8,666
|
Hmm that doesn't sound too good. So what do we do when our A4000 PSUs start to fail? :-(
-- moto
__________________
Code:
10 IT'S THE FINAL COUNTDOWN 20 FOR C = 1 TO 2 30 DA-NA-NAAAA-NAAAA DA-NA-NA-NA-NAAAA 40 DA-NA-NAAAA-NAAAA DA-NA-NA-NA-NA-NA-NAAAAA 50 NEXT C 60 NA-NA-NAAAA 70 NA-NA NA-NA-NA-NA-NAAAA NAAA-NAAAAAAAAAAA 80 GOTO 10 |
||||||||
|
|
|
|
|
#6 | ||||||||
|
Kindred of Babble-on
![]()
Join Date: Sep 2004
Location: Ioannina , Greece
Posts: 2,466
|
see the EAB link on my previous post!
:-D better try the new psu before u canibalise the old! |
||||||||
|
|
|
|
|
#7 | ||||||||
|
Premium Member
Join Date: Nov 2005
Posts: 8,666
|
That's awesome - thanks Keropi and LoadWB :-D
-- moto
__________________
Code:
10 IT'S THE FINAL COUNTDOWN 20 FOR C = 1 TO 2 30 DA-NA-NAAAA-NAAAA DA-NA-NA-NA-NAAAA 40 DA-NA-NAAAA-NAAAA DA-NA-NA-NA-NA-NA-NAAAAA 50 NEXT C 60 NA-NA-NAAAA 70 NA-NA NA-NA-NA-NA-NAAAA NAAA-NAAAAAAAAAAA 80 GOTO 10 |
||||||||
|
|
|
|
|
#8 | ||||||||
|
Too much caffeine
![]()
Join Date: Feb 2007
Posts: 136
|
I have had good results with my ATX adaptation. After using the ATX adapter and having nothing but problems I tried this:
ATX poewer supplies have plenty of power the issue is that all ATX power supplies use 18g or 16g wire and that not sufficent to power the +5 volt current draw. The best thing to do is take two of the +5v lines from the ATX and tie them to the same pin on the Amiga PS plug and do not use the ATX to amiga adapter as the connections also cause issues. This issue is solved by physically cuting the wires short on the ATX PSU (one at a time so you know what goes where) and connect it directly to the Amigas connector using crimp on connectors. ATX power supplies have several +5volt lines that all go back to the same source inside but confirm this with a volt meter before proceeding. |
||||||||
|
|
|
|
|
#9 | ||||||||
|
Kindred of Babble-on
![]()
Join Date: Sep 2004
Location: Ioannina , Greece
Posts: 2,466
|
interesting Ross1....
|
||||||||
|
|
|
![]() |
| Bookmarks |
| Tags |
| smaller , psu , a4000 |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Which size LCD monitor is best for Amiga 3000? Is smaller better? | barney | Amiga Hardware Issues and discussion | 4 | 04-28-2009 03:54 AM |
| Need help using TSgui (and making my adf's smaller) | AlienBreed | Amiga Hardware Issues and discussion | 2 | 10-25-2007 02:13 PM |
| PSU smaller than Micro-ATX | motorollin | Amiga Hardware Issues and discussion | 7 | 05-19-2007 02:10 PM |
| Smaller, energy efficient turbo card for A1200 | Protek | Amiga Hardware Issues and discussion | 51 | 03-03-2007 02:15 AM |
| Smaller then a laptop, larger then a Palm, and with a keyboard | the_leander | Alternative Operating Systems | 22 | 12-20-2004 04:38 AM |