»

[65coupei6]

Serial interface for Amiga 1200, Amiga 600, Buddha (Flash) and X-Surf


• for A1200 and Buddha Flash
• compatible with the four clock-ports on the Z4 A1200 Zorro board
• optional adapter for A600 and old Buddha/Catweasel Models
• Baudrate up to 460800 Baud, MIDI compatible
• supports low Baudrates and long Cables
• low CPU-Load because of large Fifos
• serial port 25-pin (IBM-standard, so 9-pin Sub-D is possible as well)
• superflat design, fits with all known A1200 expansions (even with BVision!)
• easy installation of the Hardware: colour photo print included!
• easy installation of the Software: just boot from the disk!
• compatible with digital cameras, Miami, terminal programs, faxprograms, and all programs using the serial.device
• compatible with Melody 1200 Sound expansion on the same clock-port
• Up to ten Silversurfer boards in einem Computer supported (if you've got so many clock-ports :-)).
• available now, no delays!

Silversurfer is the alternative for the cost-conscious user if you want to expand your Amiga with a serial interface. We did our best to reduce the price without having to make any compromises in value and performance: The top baudrate is higher than most serial accessories can handle, the software is simply one-hundred percent, and there are numerous ways to connect the board to an Amiga.
As usual with individual Computer's products, you get a full ready-to-go package without having to buy any additional cables or adapters like you have to with other vendors.

The shape of the Silversurfer is so smart that it didn't take long before the first copy arose on the market. That's a nice honour, because it's a good sign that there's no better way to do it!
Naturally, the Silversurfer cannot avoid every place in the computer. There's a mechanical conflict with Mikronik and RBM Zorro-expansions that cannot be resolved, but this is totally compensated by the Silversurfer supporting the four clock-ports of the new Z4-board for the Amiga 1200. In fact, the Silversurfer is the first card on the market to support these ports!
If you don't want to change your Zorro-board, you can operate the Silversurfer on the clock-port of the Buddha Flash controller, and that fits into any Amiga with Zorro-Slots.
Another advantage over competing products is the excellent drivers: Low CPU load for uninterrupted multitasking and compatibility with all the software we know, together with an unparalleled ease of installation make the Silversurfer first-choice for anyone. No matter if you're using an A600 without accelerator or a fully equiupped A4000 - Silversurfer will move your data securely.

$20 Shipped in the USA
Email me for Outside the USA
c64@mustangindex.com

[redrumloa]

The Silver Surfer also works with the C64/128, if you own a Retro Replay or MMC64.

[Amiduffer]

Are there any links to pictures of the equipment?

[65coupei6]

Here is a pic.

It comes with a DB25 Serial connector. I also have some DB9's I can throw in.

[zyphoid]

http://www.softhut.com/cgi-bin/test/Web_store/web_store.cgi?page=catalog/hardware/ioaccel/silversurfer.html&cart_id=4235112_28156

[weirdami]

Baudrate up to 460800 Baud

Would you call it baudy, then?

[Amiduffer]

weirdami wrote:

Would you call it baudy, then?