»

[Robert17]

Morning Folks,

I need to make a Mountlist that will mount my Hard Drive partitions. I'm using GVP Tekmagic Scsi device so it Cannot automount anything other than Fastfilesystem partitions.

So the plan is, I'm going to use a Buddha IDE controller with a Compact flash card to boot from, then I'd need a mountfile to mount the hard drive on the scsi controller

Just need to know how to make a mountlist and how to use it

Many Thanks

Robert

[motorollin]

There are mountlist generators on Aminet. I have never used one, but I would imagine you feed it the device and unit and it works the rest out and creates the mountlist for you.

--
moto

[motorollin]

RDBMount looks like it could be another option. From the readme:

This program is a Mount wich read information from RigidDiskBlock of
harddisk instade of mountlist. This allow to not auto-mount all your
harddisk partition but only when you need it. (I personaly use this a lot).
Since info are taked from RDB and not from a mountlist, your are sure
that info are allways up-to-date ans there are no risk to corrupt your disk
by using wrong high/end/cyl value in a mountlist

--
moto

[pVC]

Since you're using OS 3.9, I'd try it's inbuild late-mount option. You can define device, unit and partition to mount or just mount all found partitions. No need to create mountfiles, just add one line to devs:nsdpatch.cfg file. At least works for me with big partitions on internal ide, which can't be mounted in boot time yet...

[Oli_hd]

I need to make a Mountlist that will mount my Hard Drive partitions. I'm using GVP Tekmagic Scsi device so it Cannot automount anything other than Fastfilesystem partitions.

Why not just make a 1Meg partiton in ffs pointing to the other partition?

[Amiga1200PPC]

Use gigledisk.
It works great.
I use it e.g. to mount/create mountfiles for Linux or USB Drives.