please help!!on war3d ppctask shows ramlib error,ppc task error!i have install new os3.9 with ward3d latest and warpos
and i put on ppc 603e the bvppc vga card.i change the rasolution in 8bit 15bit and 24bit to test gearsppc test tool.
the same message: ramlib error....ppc task error!what is mean   this message?i have problem with ppc cpu?the memory speed on ppc menu is 70ns.i try and 60ns.the same!!help me please!!!  :cry:  :cry:  :boohoo:  :boohoo:

with this two patch we solved this problem?sure?the warp3d tools gears ppc and other progs like demos w3d ppc dosent work from begining to buy the amiga ppc accelerator! :getmad:  :getmad:

OH THANK GOD I did not run in these problems... the only probs I had was because I was messing with the software...

look the memory speed on ppc configuration menu if you setting is 60ns then do 70ns and try again.
my problem is when runs warp3d progs or demos.i try to install one of the patches mcp13..lha.setting of angel tools of mmu
tryiningto run demoskope runs onces.then after that dont runs again i dont know whats happens!help? :getmad:  :getmad:

1  Make sure you have the correct Warp3d files installed (download from this site for the BVision).

2  Make sure you have the correct CGX drivers and configuration (download from ame website)

3  Try all the different "gears" programs (68k, ppc, small, window, full-screen) - do any of them work?

4  Try running it in 16-bit (not 15-bit, 8-bit or 24-bit) mode - this SEEMS to be the most compatible with Warp3d in my limited experience.

I just have: OS3.9 bb2, CGX v4, CyberGL, Warp3d and mine works fine (in 16-bit 1024*768 screenmode).

tolishot wrote:
the warp3d tools gears ppc and other progs like demos w3d ppc dosent work from begining to buy the amiga ppc accelerator! :getmad:  :getmad:

Warp3d was written by Hyperion (iirc), whereas the Blizzard PPC accelerator was produced by Phase5/dce (depending on version).  
Phase 5 also commissioned the PowerUP OS supplement (ppc.library), and integrated cybergraphics RTG system into their firmware, which allows the Bvision to run "out of the box".
Chances are you are running WarpUP (written by Sam Jordan) adopted by H&P which runs at the exclusion of PowerUP, and possibly using the BPPCfix written by Harry Sintonen.

Confused?  Imagine how your confused your amiga is.

The fact that this tangle of patches, mutually exclusive OS patches, RTG systems and re-written and backward engineered drivers runs AT ALL is some minor miracle imho.

So no, Warp3d doesn't "just run" - it takes a bit of tweaking.   :-D

(Apologies for mis-spellings, lack of correct accreditation, etc etc)

@Doraemon

I tryed that suggested tools without good luck.

The suggested tools only fix the ramlib crash, nothing else. They do not fix any configuration errors or other bugs.

Soory, have been using WhichAmiga in the last couple of days to check my PPC was working, I think your name got stuck. :-)

Frank Willie was the BPPCfix author I believe (sorry Frank :-)).

BTW - I thought WhichAmiga needed ppc.library (or ppclibemu) to be active to detect  the PPC?  I have BPPCfix and WarpOS installed, with no ppc.library emulation, and WhichAmiga still seems to be detecting my PPC.  Did you fix this in later versions?