Author Topic: PCMCIA ATA card...[SOLVED] (Read 1252 times)

Nickman · « **on:** March 13, 2006, 02:38:01 PM »

Would it be possible to make this work in an A1200 ?

SanDisk PC Card ATA

It shows up in Prepcard but it says it's write protected and an older version just say write error when i press prep card.

Information in prep card:
Device: I/O Device 250ns (700ns for the older one)
Information:
SanDisk
SDP
Version 4.1 5/3 0.6

odin · « **Reply #1 on:** March 13, 2006, 02:46:57 PM »

Perhaps you should use an alternative .device (no suggestions..) and FAT95 from Aminet?

Nickman · « **Reply #2 on:** March 13, 2006, 02:49:41 PM »

I will try this but it's for CF cards only ?
CFD

adolescent · « **Reply #3 on:** March 13, 2006, 05:55:18 PM »

PrepCard is for SRAM (and PSRAM) cards only. Try CFD it is your best bet getting it to work. However, you won't be able to directly boot from the card.

Nickman · « **Reply #4 on:** March 13, 2006, 07:23:18 PM »

It works great with CFD and Fat95 :-D

Author Topic: PCMCIA ATA card...[SOLVED] (Read 1252 times)

Nickman

PCMCIA ATA card...[SOLVED]

odin

Re: PCMCIA ATA card...

Nickman

Re: PCMCIA ATA card...

adolescent

Re: PCMCIA ATA card...

Nickman

Re: PCMCIA ATA card...