Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: How to open an A520?  (Read 1161 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline Dingo_ausTopic starter

  • Jr. Member
  • **
  • Join Date: Nov 2005
  • Posts: 73
    • Show only replies by Dingo_aus
    • http://www.users.on.net/~symes/
How to open an A520?
« on: January 13, 2006, 10:50:47 AM »
What is the trick to opening up an A520 module?

There are no screws I can see. I presume there are some tougues/tags.

Any hints where they might be so I need inflict only necessary screwdriver scratches?

Thanks,

Dingo_aus
Logged
Australian and into robotics? Or want to be?
Visit Australian Amateur Robotics
http://www.users.on.net/~symes/
 

Offline musashi

  • Newbie
  • *
  • Join Date: Aug 2005
  • Posts: 9
    • Show only replies by musashi
Re: How to open an A520?
« Reply #1 on: January 13, 2006, 11:35:12 AM »
Hi,

AFAIK is pretty simple. Just lift the top of the a520 with your hands. I found no srews or tags etc.
Logged
 

Offline motorollin

  • Hero Member
  • *****
  • Join Date: Nov 2005
  • Posts: 8669
    • Show only replies by motorollin
Re: How to open an A520?
« Reply #2 on: January 13, 2006, 11:44:04 AM »
How about Goldfinger's laser bench?

"Do you expect me to open?"
"No Mr. A520, I expect you to DIE!!!"

--
moto
Logged
Code: [Select]
10  IT\'S THE FINAL COUNTDOWN
20  FOR C = 1 TO 2
30     DA-NA-NAAAA-NAAAA DA-NA-NA-NA-NAAAA
40     DA-NA-NAAAA-NAAAA DA-NA-NA-NA-NA-NA-NAAAAA
50  NEXT C
60  NA-NA-NAAAA
70  NA-NA NA-NA-NA-NA-NAAAA NAAA-NAAAAAAAAAAA
80  GOTO 10
 

Offline Oldtimer

  • Newbie
  • *
  • Join Date: Jan 2006
  • Posts: 2
    • Show only replies by Oldtimer
Re: How to open an A520?
« Reply #3 on: January 13, 2006, 01:03:58 PM »
Hello,

There are no screws or locking tabs to worry about.

I find the best tool for the job is a flat-bladed knife.

Start at the front (DB23 connector) where there's no overlap in the seam and work your way towards the back, opening the seam a couple of millimeters at a time.

You should have the cover off in no time.
Logged
 
Pages: [1]   Go Up
« previous next »