|12-28-2005, 07:02 AM||#1|
Join Date: Dec 2005
USING THE ATX SOFT POWER SWITCH
Im using an ATX PSU for my A1200T
To switch the amiga on, i have shorted out a couple of wires so that when ever it is plugged in it switches on.
Is there any way of using the existing soft switch in the Tower case to switch the amiga on?
|12-28-2005, 07:22 AM||#2|
Join Date: Apr 2003
Re: USING THE ATX SOFT POWER SWITCH
Hmm Deja vu, I just said exactly this in another thread:
No, an atx soft switch is a momentary push to make, which means when you let go, the circuit is broken again and the psu will switch off.
What you need to do is replace that switch with a locking or toggle switch that stays in the same state until you press it again
Stay safe on the Internet
|atx , power , soft , switch|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Amiga ATX power switch||mikolas||Amiga Hardware Issues and discussion||14||08-04-2008 07:20 AM|
|A4000D won't boot on 1st power-on , need to switch it off - then on again!||keropi||Amiga Hardware Issues and discussion||17||06-27-2007 02:32 AM|
|Pinout "ram and HD switch" Alfa Power A500 IDE external drive.||BuzzBrain||Amiga Hardware Issues and discussion||0||03-04-2007 02:34 PM|
|Help ! 220V to 110V power supply switch?||ckillerh3||Amiga Hardware Issues and discussion||7||12-26-2005 06:13 PM|
|1084 Monitor Power Switch doesn't latch....Replacements?||Antiriad||Amiga Hardware Issues and discussion||5||01-04-2005 12:17 PM|