»

[wheels]

I have recently upgraded a 3000 with an MKII 060 75megs ram etc. and I'm getting a cannot create CL_history or something like that when I run Ibrowse 2.4 demo.

Otherwise just some random problems. Does anyone have any time saving tips on the Phase 5 Cyberstorm MKII in a 3000 that might improve stability/functionality? I had to download the disks for it and I didn't get a manual so I don't know if I did everything right on the install.

Running 3.9 Boing bag 1 wouldn't load

Picasso II
C= 2065 ethernet
1 gig and 10 gig scsi drives on mobo

TIA

JLW

[Argus]

You might want to do the int_2 hack anyway, though this is probably not your problem. Try different versions of the 68060.library and maybe different RAM simms if you have them. Try re-installing Ibrowse and make sure you have at least v43 of installer. There is reportedly a run of serial numbers for the MKII Cyberstorm that do not work properly in the A3000 so you could check your s/n.

From my experience, there is a problem in the install script for BB1. I had to edit the first few lines of the script before I could get it to work, though I can't remember what I had to comment out exactly, but it was hanging on my A3000 as well.

[Flashlab]

The serial numbers can be found here:
http://amiga.resource.cx/exp/search.pl?dir=a3000proc#cyberstorm2

I have the manual of the MK2 and it says about the jumpers that they should be in the standard positions as stated in the A3000 manual. So if there has never been anonther accelerator in the 3000 then the jumpers are ok.