amiga.org
     
iconAll times are GMT -6. The time now is 05:46 AM. | Welcome to Forum, please register to access all of our features.

» Amiga.org » Amiga computer related discussion » Amiga Gaming » Problems running Syndicate

Amiga Gaming This forum is dedicated to games software and solutions for the Commodore Amiga computer. Need help blowing up pixels? Know of the next gaming revolution? Talk about it here.

Reply
 
Thread Tools Display Modes
Old 07-21-2005, 01:15 PM   #1
Viper
Merely Curious
Points: 3,807, Level: 39 Points: 3,807, Level: 39 Points: 3,807, Level: 39
Activity: 0% Activity: 0% Activity: 0%
 
Join Date: Jun 2004
Posts: 20
Default Problems running Syndicate

Hi all

I have just installed Syndicate on my A1200 and am unable to run it. I have installed Syndicate using WHDLoad and when I try to run it I get the following error: Can't allocate ExpMEM.

Does anyone know what this means?

My Amiga is a bog standard A1200 with a 4Gb hard drive installed running WB 3.1

Thanks
Viper
Viper is offline   Reply With Quote
Old 07-21-2005, 02:16 PM   #2
orange
Kindred of Babble-on
Points: 18,002, Level: 85 Points: 18,002, Level: 85 Points: 18,002, Level: 85
Activity: 1% Activity: 1% Activity: 1%
 
orange's Avatar
 
Join Date: Dec 2003
Location: Serbia
Posts: 2,532
Default Re: Problems running Syndicate

you probably need more RAM, especially FAST which you don't have
orange is offline   Reply With Quote
Old 07-21-2005, 02:41 PM   #3
Matt_H
VIP / Donor
Points: 22,261, Level: 92 Points: 22,261, Level: 92 Points: 22,261, Level: 92
Activity: 37% Activity: 37% Activity: 37%
 
Matt_H's Avatar
 
Join Date: Mar 2003
Location: Boston, MA, United States
Posts: 4,985
Default Re: Problems running Syndicate

Yep. More RAM is definitely in order. As a temporary measure, disable the PRELOAD tooltype. You might get it running, but any disk access performance will be very bad.
Matt_H is offline   Reply With Quote
Old 07-21-2005, 03:13 PM   #4
Viper
Merely Curious
Points: 3,807, Level: 39 Points: 3,807, Level: 39 Points: 3,807, Level: 39
Activity: 0% Activity: 0% Activity: 0%
 
Join Date: Jun 2004
Posts: 20
Default Re: Problems running Syndicate

This might be a silly question but as a noob how do I disable the PRELOAD tooltype?

Cheers
Viper is offline   Reply With Quote
Old 07-21-2005, 03:54 PM   #5
Trooper
Too much caffeine
Points: 5,274, Level: 46 Points: 5,274, Level: 46 Points: 5,274, Level: 46
Activity: 0% Activity: 0% Activity: 0%
 
Join Date: Jul 2002
Posts: 133
Default Re: Problems running Syndicate

Single click the Syndicate icon (to select it), Then press the right mouse button and go to the icon menu at the top of the screen and select "infomation".

In the window that appears, Look for the word "PRELOAD" and click it. That line will now appear in the empty space at the bottom of the window (you can now edit it). Enclose the entire line in a set of brackets and press return/enter, The click on the save button.

The line should look something like this.

(PRELOAD......)

Trooper
__________________
Rainbow Islands: \"The game is sometimes called \"Bubble Bobble 2\". However, two other games --\"Bubble Symphony: The Story of Bubble Bobble 2\" and \"Bubble Bobble 2\"-- claim the same name. Rainbow Islands happens after Bubble Bobble. Bubble Symphon...
Trooper is offline   Reply With Quote
Old 07-21-2005, 04:11 PM   #6
Mad-Matt
Technoid
Points: 7,713, Level: 58 Points: 7,713, Level: 58 Points: 7,713, Level: 58
Activity: 2% Activity: 2% Activity: 2%
 
Join Date: Mar 2002
Posts: 242
Default Re: Problems running Syndicate

For a bog standard A1200, your far better of using the hd installer that comes with the game and running from wb without the need of whdload.
Mad-Matt is offline   Reply With Quote
Old 07-21-2005, 04:56 PM   #7
Hyperspeed
Defender of the Faith
 
Join Date: Jun 2004
Posts: 1,749
Default Re: Problems running Syndicate

Syndicate wasn't an AGA game so won't need a lot of memory. Compare 512KB of an A500 to 2,048KB of an A1200 and I'd say there's something else at fault.

I couldn't get Syndicate to work on my Blizzard 1230-IV 50Mhz - it was always too fast and would crash at random intervals. Needless to say it's even worse on Blizzard 1260.

While we're on the subject of Syndicate, even though the Atari Jaguar version has more colours and runs on the same 68000 processor (albeit with 2x super chips helping it out) the A500 one is actually better! The Amiga one has animated interludes and intro, a pulsing noise in the background, smoother scrolling and crisper sound samples.

Also, did you know that by pressing `D' on the keyboard you can self destruct?

:-D
Hyperspeed is offline   Reply With Quote
Old 07-22-2005, 03:29 AM   #8
Viper
Merely Curious
Points: 3,807, Level: 39 Points: 3,807, Level: 39 Points: 3,807, Level: 39
Activity: 0% Activity: 0% Activity: 0%
 
Join Date: Jun 2004
Posts: 20
Default Re: Problems running Syndicate

Well I give up, I have tried removing the Preload and still the same problem.

It might be worht mentioning that I have to use WHDLoad to install as I found the disks in my loft from when I owned my 1st amiga, there was no install disk with it just the game disks, also the original disks won't load (Probably due to the ammount of dust when stored) So being a n00b and as I own the original I downloaded a WHDLoad image and used that.

The only thing I can think of is that the WHDLoad image is broken.

I will keep trying and I am sure something will pop up

Thanks for all the help

Viper
Viper is offline   Reply With Quote
Old 07-22-2005, 03:37 AM   #9
NoFastMem
Technoid
Points: 8,020, Level: 60 Points: 8,020, Level: 60 Points: 8,020, Level: 60
Activity: 2% Activity: 2% Activity: 2%
 
Join Date: Jul 2003
Posts: 428
Send a message via AIM to NoFastMem
Default Re: Problems running Syndicate

IIRC, Theme Park had no specific "install" disk... This also being a Bullfrog game, perhaps the same applies (I do recall that they both invalidated my hard drive as a matter of routine... Grrr.) If you haven't already, check out the contents of each disk from the Workbench, starting with the last disk.
__________________
Χριστοφόρος
AKA that_punk_guy
NoFastMem is offline   Reply With Quote
Old 10-21-2007, 02:32 PM   #10
taunusand
Cult Member
Points: 2,448, Level: 29 Points: 2,448, Level: 29 Points: 2,448, Level: 29
Activity: 2% Activity: 2% Activity: 2%
 
taunusand's Avatar
 
Join Date: Oct 2007
Location: Denmark
Posts: 512
Default Re: Problems running Syndicate

Quote:
Trooper wrote:
Single click the Syndicate icon (to select it), Then press the right mouse button and go to the icon menu at the top of the screen and select "infomation".

In the window that appears, Look for the word "PRELOAD" and click it. That line will now appear in the empty space at the bottom of the window (you can now edit it). Enclose the entire line in a set of brackets and press return/enter, The click on the save button.

The line should look something like this.

(PRELOAD......)

Trooper
I tried this and I still have the same problem. FastRAM should not be a problem here, my configuration is: A4000 040/25, 2Mb chip, 16Mb fast ram.
Some of my games (not all) come with this error
Suggestions?
__________________
A4000 060 - Internet & mail
A1200/030HD 2+32MB ram
A600HD 2MB chip ram (IDE-CF adapter)
CDTV Black mouse+keyboard+floppy+C1084
CD32 - Just for fun :-D
taunusand is offline   Reply With Quote
Old 10-21-2007, 03:26 PM   #11
Bazzaq
Technoid
Points: 4,685, Level: 43 Points: 4,685, Level: 43 Points: 4,685, Level: 43
Activity: 1% Activity: 1% Activity: 1%
 
Join Date: Sep 2005
Location: Liverpool, UK.
Posts: 363
Default Re: Problems running Syndicate

Syndicate has a working hd install on one of the disks, i recall installing it on an a600 last year.. it was very slow install though.. Game worked great once installed.
__________________
--------------
A4000T 060@50/PPC@233/128MB,Prometheus/Voodoo3/Lan,DCE SD/FF,Prelude
Bazzaq is offline   Reply With Quote
Old 10-21-2007, 04:38 PM   #12
rkauer
Desperately needs a life
Points: 10,960, Level: 69 Points: 10,960, Level: 69 Points: 10,960, Level: 69
Activity: 2% Activity: 2% Activity: 2%
 
rkauer's Avatar
 
Join Date: May 2006
Location: São Leopoldo, RS, Brazil
Posts: 3,263
Send a message via MSN to rkauer
Default Re: Problems running Syndicate

I use to play Syndicate very often.

The install applet is in the 1st or 2nd disk (don't remember quite now). It works with any standard Amiga so far. Even with 030 accel. boards. Dunno about >040 ones.

Booting from the disks the game runs like a charm. I also have issues running from hd. With or without WHDLoad.

__________________
Goodbye people.

I'll pop on from time to time, RL is acting up.
rkauer is offline   Reply With Quote
Reply

Bookmarks

Tags
syndicate , running , problems

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
problems running AFA_os Craven1200 Amiga Software Issues and Discussion 21 01-09-2007 12:30 AM
Help! Problems running WinUAE Waterland Amiga Emulation 5 10-23-2006 06:22 PM
CHIP RAM Problems: Keeps running out CU_AMiGA Amiga Hardware Issues and discussion 3 04-02-2005 07:40 AM
Any problems running a CS Mk II 060 in an A4000D? samanosuke Amiga Hardware Issues and discussion 8 02-18-2005 01:36 PM
Problems running PPC demos - Please help! spotUP Amiga Software Issues and Discussion 7 03-18-2003 03:54 PM