|
Register or have you forgotten your password?
|
|
|
| Amiga Hardware Issues and discussion This forum is dedicated to the discussion and resolution of issues related to Classic and Next Generation Amiga hardware. Got a problem with a piece of hardware? Click to speak. |
![]() |
|
|
Thread Tools | Display Modes |
|
|
#1 | ||||||||
|
Merely Curious
![]()
Join Date: Jun 2005
Posts: 5
|
As the ide port on the 4000, does not have the missing pin, can you use a normal ide cable, and just make a hole for the pin, or do I need to locate a Amiga specific lead?
|
||||||||
|
|
|
|
|
#2 | ||||||||
|
Beginner
![]()
Join Date: Mar 2005
Posts: 42
|
AFAIK, you can find normal IDE cables without the missing hole, there is no problem in using them, just be careful to correctly align the cable. :-D
__________________
A500, KS 1.3, 1 Mb RAM A1200, KS 3.0, 2 Mb Chip+8 Mb Fast RAM, 1 Gb CF Lots of 8-bit computers (:-D me thinks I'm the only Romanian that owns 3 Acorn BBC's - 2 Model B's and a Master) Athlon X2 4200+, 2x1 Gb DDR II, 250+750Gb Seagate Barracuda SATA ... |
||||||||
|
|
|
|
|
#3 | ||||||||
|
Technoid
![]()
Join Date: Mar 2005
Posts: 250
|
Yes, you can use normal IDE cable. Just fit one yesterday into my A4000. Works fine. :-D
|
||||||||
|
|
|
![]() |
| Bookmarks |
| Tags |
| a4000 , cable , drive , hard |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Is this hard drive set up ok for running OS4 in my A4000? | A4000_Mad | Amiga Hardware Issues and discussion | 20 | 11-07-2008 03:09 AM |
| Hard drive underneath floppy drive in A4000? | motorollin | Amiga Hardware Issues and discussion | 19 | 01-11-2008 12:28 PM |
| A4000 Hard Drive install | chrisw8 | Amiga Hardware Issues and discussion | 7 | 07-06-2006 06:08 AM |
| 2.5" hard disk drive with cable listed | monkian_2k | Amiga Marketplace | 4 | 09-23-2004 01:14 PM |
| how to format an ide hard drive on A4000 | lolof | Amiga Hardware Issues and discussion | 16 | 07-28-2004 02:11 PM |