|03-02-2003, 04:54 AM||#1|
Defender of the Faith
Join Date: May 2002
Blog Entries: 2
Invisible Lacie Firewire CDRW Problem
Mac computer running OS 9.2.2 doesnít register the (external) Lacie Fire Wire CDRW 16x10x40x. Using Toast Lite 5.0.2 L software. The CD draw will open and close but I canít read from a CD ROM. It makes the usual noise when switched on as if the mechanism is working.:-?
When a blank CD ROM is inserted in the drive the usual options to launch Toast or format the CDR do not occur. The drive has itís own power source so the I doubt there is a lack of power. Could it be a software problem?
Power Mac G4 450 MHz (blue front and silver sides)
20 Gb HD (Split into two partitions for OS 9.2.2 and OS X 10.2)
640 Mb Memory
DVD ROM (internal)
Zip 100 (internal)
I tried Knowledge base at Apple but all the results I got where about incomatability with OS X, and when I tried to post a question I got an error message. Yes I was logged in.
A couple of weeks ago everything was working.
Thanks in advance for any help?:-(
AKA ED-209 on IRC...
|cdrw , firewire , invisible , problem , lacie|
|Thread||Thread Starter||Forum||Replies||Last Post|
|CDRW problem?~!||VooDoo||Amiga Hardware Issues and discussion||4||01-14-2007 04:34 PM|
|Invisible checkmarks||Tempest||Amiga Software Issues and Discussion||3||06-19-2006 11:38 AM|
|Invisible 2.5" IDE HD in A1200||Amiga Hardware Issues and discussion||4||03-11-2005 04:43 PM|
|USB2.0 vs FireWire?||takemehomegrandma||Amiga Hardware Issues and discussion||8||09-26-2003 11:57 AM|
|Firewire for A1/OS4||Amiga Hardware Issues and discussion||7||11-15-2002 01:30 PM|