|01-07-2005, 10:58 PM||#1|
Join Date: Jan 2005
1084 Monitor doesn't work with RGB. Composite works fine
My 1084 Monitor has stopped displaying the Amiga RGB signal. It worked for a day after I removed from storage and the last time I turned it on it didn't. However if I connect an external composite input it works. Could the problem be with the Amiga, the cable or the monitor?
Anybody else had this problem before?
BTW The Amiga comp output is working propely
|01-07-2005, 11:50 PM||#2|
Join Date: Feb 2002
Re: 1084 Monitor doesn't work with RGB. Composite works fine
Could be a problem with the computer, cable or monitor.
There are two push button switches at the rear of the 1084S monitor which need to be set to the correct position to select RGB input, check these are correct.
These monitors have a common fault where the 9 way D-range socket develops cracked/dry solder joints.
Try wiggling the connector and see if you can get a picture. You may need to have it resoldered.
|fine , monitor , 1084 , rgb , work , works , composite|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Amiga 1084 monitor $10 OBO||redrumloa||Amiga Marketplace||3||12-12-2008 02:46 PM|
|FA Commodore 1084 RGB Monitor||sprocket||Amiga Marketplace||3||08-28-2007 04:16 PM|
|Commodore 1084 monitor in box||TjLaZer||Amiga Marketplace||4||02-08-2007 07:24 PM|
|os 3.9 and 1084 monitor||SIR-GERMAN||Amiga Software Issues and Discussion||4||04-30-2006 01:01 PM|
|1084 Monitor Issues ...||drwho||Amiga Hardware Issues and discussion||3||04-02-2004 10:26 PM|