»

[TjLaZer]

Ok I have been fiddling with my 3000T's HD settings in HDToolBox and would like to know the proper settings to put. I have a Cyberstorm MKII 060, 18GB SCSI-2 HD and OS3.9. I currectly have it as: Mask 0x07fffffff, Max Transfer 0x00ffffff. I am seeing some weird stuff like some WHDLoad games taking forever to load, ie disk access for a long time, but when I load them from CD or RAM they load right up. (not large games that are being loaded by preload option, example Arkanoid)

Thanks

[Piru]

Mask 0x07fffffff, Max Transfer 0x00ffffff.

These seem ok to me, except one extra 0 before 7. It shouldn't really matter, 0x7fffffff and 0x07fffffff should be interpreted the same.

[Framiga]

Hi

Mask- 0xFFFFFFFC

MaxTransfer- 0x0001FE00

1024 blocksize for UWSCSI and 512 for internal IDE.

here on all partition (PFS3 and SFS)

btw . . .which are the right values, for a CD mountlist?

Should it be the same?

Cheers

[TjLaZer]

Well I tracked down the problem, AmigaOS ROM Update! If I remove it all the Games run fine. I had problems with this on my 1200 also.

[patrik]

@TjLaZer:

I am pretty sure the A3000(T) SCSI-controller should have the Mask set to 0x7FFFFFFC - ie DMA to/from the first 2GB (by C= spec), only to/from longword aligned addresses.

There should be no zero right after the 0x as you already have eight digits.

MaxTransfer should be 0xFFFFFF. No reason to go lower with a proper controller.


/Patrik