»

[Speelgoedmannetje]

I got a A590 harddisk, wich i recently formatted (the previous owner had too much stuff like databases wich alter system configurations etcetera, so I decided to format it), but now I do not know how to install WB1.3.

[Lando]

Install the drive then just copy WB manually from the floppy. There's no installer for 1.3 afaik.

[Speelgoedmannetje]

I tried, but it wouldn't boot.
But now you say that, I remembered that I was forgotten to alter the commands in the startup-sequence from DF0: to DH0:
So I'll try that thanks for the tip

On A2000 I just copied the WB1.3 disk and it worked just fine. I didn't need to modify start-up sequence.

Does it depent on how disk is formated (FFS)? I formated disk with WB2.1 (but I don't think there is a difference).

[seer]

@Speelgoedmannetje

Altijd leuk, neerlandse aliassen ;-)

Anyway, there should be 2 disks that came with the A590, a RAM test disk and a Setup Disk. IIRC the setup disks contains HD-Toolbox for OS1.3 to partition the A590, and maybe an installer to set OS1.3 on the HD.. Still have both disks, unfortunalty only the RAM test still works so I can't check to see if my memory isn't failing.. (Ironic in a way.. My memory failing and having a RAM test disk) :-o

[Speelgoedmannetje]

So fruitcake of a seer (nice page, continue your continueing mission to drag down new strange starships, the boldly draw whats nevver been drawn before!) but from now i am more serious
There were no harddisk tool disks between the disks that came with my amiga, so anyone who knows where to find the images of these disks i'd be very pleased (got me already Aexplorer)
:roll:

[seer]

Haven't been using Imagin for a long time, so no more 3D rendering ever since :-(, no more strange spaceships..

Go here and near the bottom there is a link you can try..

[Speelgoedmannetje]

Hey thanks!! Thats just what i was looking for!
Ten pints for the thirsty seer

[seer]

Youre welcome.. Stick around, aorg is a great place between the bitching and flamewars ;-)