|
Register or have you forgotten your password?
|
|
|
| Amiga Software Issues and Discussion This forum exists for the discussion of the use, issues with, and fun brought about by classic and next generation Amiga software. |
![]() |
|
|
Thread Tools | Display Modes |
|
|
#1 | ||||||||
|
Hobbyist
![]()
|
Hello.
Is easynet incompatible with AExplorer? I can't get it to work. I have a other OS drive that use miami to connect and there it works. I use the same IP adress on the amiga. I can't get my wireless card to work rigth. with no password I can connect but it really slow. I have tride to set the wireless station rigth next to the amiga. Wifisignal 1.4.2 from aminet Signal level -73dB Noise Level -91 dB Signal to noise 18 dB Signal Quality Poor ....Well it I had a slow ping last night but nothing today..... ![]() With WEP password I can't connect... Same result with Wifisignal 1.4.2 from aminet Signal level -73dB Noise Level -91 dB Signal to noise 18 dB Signal Quality Poor Yes and Easynet works grate and fast if I use a pcmcia cabel card insted. NETPCM003 Sombody that have som good advise Espen |
||||||||
|
|
|
|
|
#2 | ||||||||
|
Too much caffeine
![]()
Join Date: Aug 2008
Location: Western Wisconsin, USA
Posts: 147
|
Try moving the Amiga away from the wireless router... Try 6 feet or more if possible.. Also make sure that the router is not within 3 feet of a computer monitor. I have seen monitors cause a lot of interference issues and I have had issues with receivers being too close as well...
May not solve your problem but worth a try.. |
||||||||
|
|
|
![]() |
| Bookmarks |
| Tags |
| easynet , problems , wireless |
| Thread Tools | |
| Display Modes | |
|
|