Register or have you forgotten your password?
|
|
Register or have you forgotten your password?
|
All times are GMT -6. The time now is 11:28 AM.
| Welcome to Forum, please register to access all of our features.
|
|
| Amiga Hardware Issues and discussion This forum is dedicated to the discussion and resolution of issues related to Classic and Next Generation Amiga hardware. Got a problem with a piece of hardware? Click to speak. |
 |
|
|
Thread Tools | Display Modes |
08-19-2012, 10:37 PM
|
#1 | ||||||||
|
Merely Curious
Join Date: Aug 2012
Posts: 1
|
"Not enough space" when installing Video Toaster software
When attempting to install my Video Toaster 2.0 software I get a message at the bottom of the install window that reads "Not enough space on any drive to install software". However this is not true, I have 499megs free.
I have a Commodore A2091 Hard Card. I know people have had this problem with some GVP SCSI controllers and it can be solved by added a few files to the expansion folder on the install drive. Any clue what could be causing this issue? Any help or suggestions would be greatly appreciated. Thank you for your time! -Ted |
||||||||
|
|
|
08-20-2012, 04:28 AM
|
#2 | ||||||||
|
Banned
Join Date: Jun 2012
Posts: 101
|
Re: "Not enough space" when installing Video Toaster software
Check the path to make sure that you are copying the VT 2.0 files to the hard drive. Make sure the hard drive does not have any bad blocks. Make sure that the SCSI hard drive is less then 1 gb. If it is between 1 gb to 4 gb, make sure that the A2091 board has the rev 7 roms and the rev 08 WD chip.
BTW, most GVP boards are crap, so of course you will have problems with them. |
||||||||
|
|
|
|
| Bookmarks |
| Tags |
| installing , not enough space , software , toaster , video |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
