»

[Lurch]

Does anyone currently have one of these installed?

If you do, do you have a photo of where you have soldered the two wires?

I've had a look at the website and it mentions:


Quick info about four header pins next to the IDE-connector:

|oooooo+O IDEHEADER...........
|oooooo-I 1stIdePIN...........
|
|

Poor quick and dirty "diagram" show a part of pcb at a corner.
2*6 pads/holes symbolised with 'o' are card edge jtag contacts
+-OI are four header pins
+ - are LED positive and negative terminals
O = /OVR
I = /INT2

If I look next to the IDE header there is the HDD led then there are 5 pads not 4. Do I solder two wires to the first two pads?

Assuming left to right from the IDE header it's /OVR then /INT2?

and on the Amiga left to right it's /OVR then /INT2?

:-)

[Lurch]

Guess I'm on my own, so will try it out on a spare motherboard. :-)