amiga.org
     
iconAll times are GMT -6. The time now is 03:18 AM. | Welcome to Forum, please register to access all of our features.

Amiga.org Amiga computer related discussion Amiga Hardware Issues and discussion GBA1000 Order

Amiga Hardware Issues and discussion This forum is dedicated to the discussion and resolution of issues related to Classic and Next Generation Amiga hardware. Got a problem with a piece of hardware? Click to speak.

Reply
 
Thread Tools Display Modes
Old 01-30-2013, 04:22 PM   #81
EDanaII
Cult Member
Points: 7,882, Level: 59 Points: 7,882, Level: 59 Points: 7,882, Level: 59
Activity: 2% Activity: 2% Activity: 2%
 
EDanaII's Avatar
 
Join Date: Dec 2006
Location: Phoenix, AZ
Posts: 569
Default Re: GBA1000 Order

Quote:
Originally Posted by PJM View Post
If you want the FPGA route then your better off with the minimig, natami or fpga arcade. This board is about the real hardware .
Granted, but that wasn't the point of my question. Not that I expected my point to be obvious.

You were responding to freqmax's point about dead motherboards. And that's why I asked. Real hardware is getting scarce, that's the reality of the situation, and thus the reason for my question.
__________________
Ed.
EDanaII is offline   Reply With Quote
Old 01-30-2013, 04:44 PM   #82
Plaz
Lifetime Member
Points: 13,154, Level: 74 Points: 13,154, Level: 74 Points: 13,154, Level: 74
Activity: 23% Activity: 23% Activity: 23%
 
Plaz's Avatar
 
Join Date: Feb 2002
Location: Georgia, USA
Posts: 1,614
Default Re: GBA1000 Order

Quote:
Originally Posted by freqmax View Post
Url?
Looking back through the manual, Georg references several different vendors. Elpro, Reichelt and Wurth among them, but no urls. I'd wait for Firedawg's updated digikey list.

Plaz
Plaz is offline   Reply With Quote
Old 01-30-2013, 05:54 PM   #83
yakumo9275
Technoid
Points: 5,323, Level: 46 Points: 5,323, Level: 46 Points: 5,323, Level: 46
Activity: 7% Activity: 7% Activity: 7%
 
yakumo9275's Avatar
 
Join Date: Jun 2008
Location: Melbourne/Australia + VA/USA
Posts: 301
Default Re: GBA1000 Order

sweeeeeet. my new Amber, Super Denise (390433-02 version) and NE564 showed up today awesome.

Also found an ebay auction for what looks like is the card edge connector for the zorro II slot (100 pin as 2x50, 2.54mm pitch, 3A at 200C), proble is they are being sold as lots of 10 only (price is good, 60$ for 10) here

checking mouser, they have something that might work but it has lugs on the end (easy to trim off), but $14 a pop!
__________________
--/\-[ Stu ]-/\--
Commodore 128DCR, JiffyDOS, Ultimate 1541 II, uIEC/SD, CBM 1902A Monitor
yakumo9275 is offline   Reply With Quote
Old 01-30-2013, 10:17 PM   #84
ozkano
Too much caffeine
Points: 5,647, Level: 48 Points: 5,647, Level: 48 Points: 5,647, Level: 48
Activity: 1% Activity: 1% Activity: 1%
 
Join Date: Dec 2006
Posts: 85
Send a message via MSN to ozkano
Default Re: GBA1000 Order

1 pcb for me
__________________
http://www.retrocu.com
A500,A500+,A600,A1000,A1200,A2000,A3000,A4000,CDTV ,CD32,A1
ozkano is offline   Reply With Quote
Old 01-30-2013, 10:21 PM   #85
RocketRodent
Merely Curious
Points: 16, Level: 1 Points: 16, Level: 1 Points: 16, Level: 1
Activity: 2% Activity: 2% Activity: 2%
 
Join Date: Jan 2013
Location: Central Kentucky, USA
Posts: 2
Default Re: GBA1000 Order

Yes yes yes. Please put me down for a PCB as well. I've got a few sets of custom chips to make this work.
RocketRodent is offline   Reply With Quote
Old 01-30-2013, 11:02 PM   #86
RocketRodent
Merely Curious
Points: 16, Level: 1 Points: 16, Level: 1 Points: 16, Level: 1
Activity: 2% Activity: 2% Activity: 2%
 
Join Date: Jan 2013
Location: Central Kentucky, USA
Posts: 2
Default Re: GBA1000 Order

Oh.. Are there any plans to kinda merge the component order I see going down on eab.abime.net? I see a group order forming there for the CPU's and sockets.
RocketRodent is offline   Reply With Quote
Old 01-31-2013, 01:02 AM   #87
PJM
Beginner
Points: 435, Level: 8 Points: 435, Level: 8 Points: 435, Level: 8
Activity: 10% Activity: 10% Activity: 10%
 
Join Date: Jan 2013
Posts: 46
Default Re: GBA1000 Order

Quote:
Originally Posted by RocketRodent View Post
Oh.. Are there any plans to kinda merge the component order I see going down on eab.abime.net? I see a group order forming there for the CPU's and sockets.
For the larger more expensive components yes. The easier to get bits there's little point but we'll see what develops.
PJM is offline   Reply With Quote
Old 01-31-2013, 06:10 PM   #88
yakumo9275
Technoid
Points: 5,323, Level: 46 Points: 5,323, Level: 46 Points: 5,323, Level: 46
Activity: 7% Activity: 7% Activity: 7%
 
yakumo9275's Avatar
 
Join Date: Jun 2008
Location: Melbourne/Australia + VA/USA
Posts: 301
Default Re: GBA1000 Order

oooh.. this is a nice excuse to get a hot air gun.. line of solder paste and some warm air.. instant TSOP soldering Sweeeet.
__________________
--/\-[ Stu ]-/\--
Commodore 128DCR, JiffyDOS, Ultimate 1541 II, uIEC/SD, CBM 1902A Monitor
yakumo9275 is offline   Reply With Quote
Old 02-04-2013, 12:24 PM   #89
PJM
Beginner
Points: 435, Level: 8 Points: 435, Level: 8 Points: 435, Level: 8
Activity: 10% Activity: 10% Activity: 10%
 
Join Date: Jan 2013
Posts: 46
Default Re: GBA1000 Order

First post updated with a pre order by the Feb 24th and pay by the 3rd of March.
PJM is offline   Reply With Quote
Old 02-04-2013, 03:33 PM   #90
amiman99
Lifetime Member
Points: 5,908, Level: 49 Points: 5,908, Level: 49 Points: 5,908, Level: 49
Activity: 18% Activity: 18% Activity: 18%
 
Join Date: Aug 2011
Location: San Antonio, TX
Posts: 720
Default Re: GBA1000 Order

Quote:
Originally Posted by PJM View Post
First post updated with a pre order by the Feb 24th and pay by the 3rd of March.
Pre-order is payed to kipper, is that correct?
__________________
A500 KS 2.1, 1MB Chip, 68000
A600 KS 3.1, 2MB Chip, ACA630 32MB RAM
A1000 KS 1.3, 2MB RAM
A1200 KS 3.1, Blizzard IV 50MHz 64MB RAM
A2000 KS 2.1, 68030 25MHz, 6MB RAM
A3000 KS 3.1, 68030 25MHz, 16MB RAM
A4000 KS 3.0, 68040 25MHz, 16MB RAM
CDTV KS 3.1, 4MB RAM
CD32
AROS BOX
amiman99 is offline   Reply With Quote
Old 02-04-2013, 04:03 PM   #91
billt
Cult Member
Points: 10,317, Level: 67 Points: 10,317, Level: 67 Points: 10,317, Level: 67
Activity: 7% Activity: 7% Activity: 7%
 
billt's Avatar
 
Join Date: Nov 2002
Location: Maryland, USA
Posts: 835
Default Re: GBA1000 Order

Quote:
Originally Posted by yakumo9275 View Post
sweeeeeet. my new Amber, Super Denise (390433-02 version) and NE564 showed up today awesome.

Also found an ebay auction for what looks like is the card edge connector for the zorro II slot (100 pin as 2x50, 2.54mm pitch, 3A at 200C), proble is they are being sold as lots of 10 only (price is good, 60$ for 10) here

checking mouser, they have something that might work but it has lugs on the end (easy to trim off), but $14 a pop!
Jameco for the win, US$0.49
http://www.jameco.com/1/1/43035-ec50...card-edge.html
__________________
Bill T
All Glory to the Hypnotoad!
billt is offline   Reply With Quote
Old 02-05-2013, 12:19 AM   #92
PJM
Beginner
Points: 435, Level: 8 Points: 435, Level: 8 Points: 435, Level: 8
Activity: 10% Activity: 10% Activity: 10%
 
Join Date: Jan 2013
Posts: 46
Default Re: GBA1000 Order

Quote:
Originally Posted by amiman99 View Post
Pre-order is payed to kipper, is that correct?
Yes he got a good quote on the pcbs. When he's ready to take the money ill post details.
PJM is offline   Reply With Quote
Old 03-02-2013, 12:17 PM   #93
PJM
Beginner
Points: 435, Level: 8 Points: 435, Level: 8 Points: 435, Level: 8
Activity: 10% Activity: 10% Activity: 10%
 
Join Date: Jan 2013
Posts: 46
Default Re: GBA1000 Order

Update * Now everyone has seen the shipping options payment will be taken from March 3rd through to the 11th. You will pay $46 Canadian per board to kipper2k via paypal gift or plus $2 for standard protected whose address will be supplied. After the 11th of March no further pre orders will be available.

Paypal address will be supplied by the 3rd of March. When you do so, in the paypal info you need to include the username, site you ordered from and your delivery address. Payment for shipping will be taken once the boards have arrived and you have decided how you want it shipped.*

Last edited by PJM; 03-03-2013 at 03:07 PM..
PJM is offline   Reply With Quote
Old 03-03-2013, 03:07 PM   #94
PJM
Beginner
Points: 435, Level: 8 Points: 435, Level: 8 Points: 435, Level: 8
Activity: 10% Activity: 10% Activity: 10%
 
Join Date: Jan 2013
Posts: 46
Default Re: GBA1000 Order

You can now pay! Wooohoo!

To pay send Canadian $46 per board to kipper2k (insert the at @ sign around about here) mts.net with the above info.
PJM is offline   Reply With Quote
Old 03-04-2013, 07:40 PM   #95
desantii
Amiga Addict!
Points: 5,791, Level: 49 Points: 5,791, Level: 49 Points: 5,791, Level: 49
Activity: 2% Activity: 2% Activity: 2%
 
Join Date: Sep 2009
Location: IL, US
Posts: 348
Default Re: GBA1000 Order

Interested in 1 if I still can place an order
__________________
Amiga 2000, 030 55mhz, 26mb ram, Indivision ECS, Megachip

Amiga 4000/060 Cyberstorm MKI

Amiga 500+ 2mb chip ram
desantii is offline   Reply With Quote
Old 03-05-2013, 01:41 AM   #96
PJM
Beginner
Points: 435, Level: 8 Points: 435, Level: 8 Points: 435, Level: 8
Activity: 10% Activity: 10% Activity: 10%
 
Join Date: Jan 2013
Posts: 46
Default Re: GBA1000 Order

You can indeed - Send payment with user name and forum ordered from (i.e Amiga.org) and post here that you have.
PJM is offline   Reply With Quote
Old 03-05-2013, 07:58 AM   #97
Jeff
VIP / Donor - Lifetime Member
Points: 12,481, Level: 73 Points: 12,481, Level: 73 Points: 12,481, Level: 73
Activity: 30% Activity: 30% Activity: 30%
 
Jeff's Avatar
 
Join Date: Dec 2003
Posts: 1,191
Default Re: GBA1000 Order

Payment to kipper sent for (2).

Thank You,
Jeff

Last edited by Jeff; 03-05-2013 at 07:28 PM..
Jeff is offline   Reply With Quote
Old 03-05-2013, 01:56 PM   #98
klx300r
Amiga 1000+AmigaOne X1000
Points: 10,879, Level: 69 Points: 10,879, Level: 69 Points: 10,879, Level: 69
Activity: 18% Activity: 18% Activity: 18%
 
klx300r's Avatar
 
Join Date: Sep 2007
Posts: 1,895
Blog Entries: 3
Default Re: GBA1000 Order

@PJM

my payments in to kipper for the MB!
__________________
__________________________________________________ __________________
c64-dual sids, A1000, A1200-060@50
Indivision AGA & Catweasel MK4+= Amazing
! My Master Miggies-Amiga 1000 & AmigaOne X1000 !
--- www.mancave-ramblings.blogspot.ca ---
-AspireOS.com & Amikit- Amiga for your netbook-
***X1000- I BELIEVE ***
klx300r is offline   Reply With Quote
Old 03-05-2013, 02:51 PM   #99
amiman99
Lifetime Member
Points: 5,908, Level: 49 Points: 5,908, Level: 49 Points: 5,908, Level: 49
Activity: 18% Activity: 18% Activity: 18%
 
Join Date: Aug 2011
Location: San Antonio, TX
Posts: 720
Default Re: GBA1000 Order

Payment sent to Kipper!
__________________
A500 KS 2.1, 1MB Chip, 68000
A600 KS 3.1, 2MB Chip, ACA630 32MB RAM
A1000 KS 1.3, 2MB RAM
A1200 KS 3.1, Blizzard IV 50MHz 64MB RAM
A2000 KS 2.1, 68030 25MHz, 6MB RAM
A3000 KS 3.1, 68030 25MHz, 16MB RAM
A4000 KS 3.0, 68040 25MHz, 16MB RAM
CDTV KS 3.1, 4MB RAM
CD32
AROS BOX
amiman99 is offline   Reply With Quote
Old 03-05-2013, 03:53 PM   #100
TheBilgeRat
Defender of the Faith
Points: 9,020, Level: 63 Points: 9,020, Level: 63 Points: 9,020, Level: 63
Activity: 2% Activity: 2% Activity: 2%
 
TheBilgeRat's Avatar
 
Join Date: May 2010
Location: Dundee, OR
Posts: 1,622
Default Re: GBA1000 Order

One payment sent for one board!
TheBilgeRat is offline   Reply With Quote
Reply

Bookmarks

Tags
gba1000 , order

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump