Register or have you forgotten your password?
|
|
Register or have you forgotten your password?
|
All times are GMT -6. The time now is 09:18 PM.
| Welcome to Forum, please register to access all of our features.
|
|
| Amiga Hardware Issues and discussion This forum is dedicated to the discussion and resolution of issues related to Classic and Next Generation Amiga hardware. Got a problem with a piece of hardware? Click to speak. |
 |
|
|
Thread Tools | Display Modes |
09-15-2012, 03:09 PM
|
#1 | ||||||||
|
VIP / Donor
Join Date: Jun 2002
Location: UK
Posts: 932
|
Correct jumper setting for A3000 HD
I'm looking to replace the standard 100MB SCSI Hard drive that came with my A3000 for a 10GB one I found in storage. The drive spins up fine,the HD light flashes a few times
but then the A3000 hangs on a white screen. Can anyone tell from the photos below if the jumpers are correctly set for the A3000 or if I need any termination on this drive?  
|
||||||||
|
|
|
09-15-2012, 03:17 PM
|
#2 | ||||||||
|
Lifetime Member
Join Date: Mar 2012
Posts: 731
|
Re: Correct jumper setting for A3000 HD
All SCSI drives need termination; your 10Gb drive offers active (term power) and on board. But a termination issue would cause data errors. There is another problem, I believe going on. Hang on a bit, someone with stronger opinions will shout at you shortly
|
||||||||
|
|
|
|
| Bookmarks |
| Tags |
| a3000 , correct , jumper , setting |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
