»

[Ratte]

Its done !!

With many many help ...
... today my A1000 booted from a KickWork3.1 disk.

Kickstart3.1 inside a 256KB WOM.
scsi / card / carddisk overwritten with $FF
(useless on an A1000)

trackdisk enhanced with kickwork

crunched with lzma = 251KB

	dc.w	$1111			; ROM-Header
	jmp	$00fc00d2
	dc.l	$0000ffff
	dc.w	$0028			; OS-Version
	dc.w	$003f			; OS-Revision
	dc.w	$ffff			; there is no exec.lib
	dc.w	$ffff			; version/revision
	dc.l	$ffffffff
	dc.b	0			; ROM-Text
	dc.b	"AMIGA WOM Operating System              ",0
	dc.b	"                      ",0
	dc.b	"                      ",0
	dc.b	"                    ",0
	dc.b	"        ",0
	dc.l	$ffffffff
	dc.l	$ffffffff
	dc.l	$ffffffff
	dc.l	$ffffffff
	dc.l	$ffffffff
	dc.l	$ffffffff
	dc.l	$ffffffff
	dc.l	$ffffffff
	dc.l	$ffffffff
	dc.l	$ffffffff
	dc.l	$ffffffff
	dc.l	$ffffffff
	dc.l	$ffffffff
	dc.l	$ffffffff
	dc.l	$ffffffff
	dc.l	$ffffffff
	dc.l	$ffff4e70		; RESET command
code:
	lea.l	$400,a7			; temp.stack
	clr.b	$00bfe001		; against trashed register
	move.b	#$03,$00bfe201		; overlay and power-led
	lea.l	$00dff000,a4		; chipset base address
	move.w	#$7fff,d0		; clear all pattern
	move.w	d0,(a4,$009a)		; disable all interrupts
	move.w	d0,(a4,$009c)		; clear all interrupts
	move.w	d0,(a4,$0096)		; disable all dma
	move.w	#$0174,(a4,$0032)	; init ser-port 9600 baud
	move.w	#$0200,(a4,$0100)	; init display
	move.w	#$0000,(a4,$0110)	; init display
	move.w	#$0111,(a4,$0180)	; init display
memtest:
	lea.l	$00200000,a0		; expansionmem-base
	move.l	(a0),d1			; store memory
	move.l	#"KICK",(a0)
	cmp.l	#"KICK",(a0)
	bne	autoconfig
	move.l	#"WORK",(a0)
	cmp.l	#"WORK",(a0)
	bne	autoconfig
	move.l	d1,(a0)			; restore memory
	bra	good_hardware
autoconfig:
	move.b	#$20,$00e80048		; activate the
	move.b	#$00,$00e8004a		; first expansion
	move.l	(a0),d1			; store memory
	move.l	#"KICK",(a0)
	cmp.l	#"KICK",(a0)
	bne	bad_hardware
	move.l	#"WORK",(a0)
	cmp.l	#"WORK",(a0)
	bne	bad_hardware
	move.l	d1,(a0)			; restore memory
good_hardware:
	bsr	checksum
	not.l	d5
	beq	ready_to_go
	bsr	decrunch
	lea.l	$00200000,a0
	bsr	checksum
	not.l	d5
	beq	ready_to_go
bad_hardware:
	move.w	#$0f00,(a4,$0180)	; red screen
	moveq	#10,d1
	moveq	#-1,d0
pled_on:
	bset.b	#$0001,$00bfe001	; power-led on
	dbf	d0,pled_on
	lsr	#2,d0
pled_off:
	bclr.b	#$0001,$00bfe001	; power-led off
	dbf	d0,pled_off
	dbf	d1,pled_on
	move.l	#$00015000,d0
reset:
	move.w	#$0000,(a4,0$180)	; black screen
	subq.l	#1,d0
	bgt.b	reset
	move.w	#$4000,(a4,$009a)
	lea.l	$00f80002,a0
	reset
	jmp	(a0)			; restart
ready_to_go:
	jmp	$00200002
checksum:
	move.l	#524288/4,d1		; checksumtest for
	moveq	#0,d5			; $200000-$27ffff
checksum_loop:
	add.l	(a0)+,d5
	bcc	checksum_test
	addq.l	#1,d5
checksum_test:
	subq.l	#1,d1
	bne		checksum_loop
	rts
decrunch:
.
.
.

[chiark]

Sorry to bring up the Thread from the Dead, but I thought I'd let everyone know that Piru has very, very, very kindly recompiled (or possibly hex edited, unsure which) mkkickwork.exe to remove a requirement it had on OS2.04+

I used it natively on my 1000 to create a kickwork disk. Beautiful! Prior to the patch that Piru wrote last night (a few hours after I PM'd him on here saying that it was failing on KS1.3 with fstat: I/O error) he had fixed it and replied.

It now works on KS1.3. My 1000 now kickstarts, boots and transfers to the hard drive with one disk. I owe this man a beer!

[KatManDEW]

I can't get twinkick to work. It says "ABORT! Missing OS1.3 (V34.5) data!"

I used GrabKick to snag amy 1.3 kickstart on my A1000, and it created a file called "kick34005" which I renamed to "KICK13.ROM".

Any idea what's wrong?

[Ratte]

1. uppercase letters are important "KICK13.ROM"
- seems to be OK -

2. the romfile must be an 100% image of a v34.5 a500/a2000-kickstart
- no a1000 betas or modified kickstarts (config patch for memory or pal-patches etc.)

try to save your romimage from a a500 with real 1.3 ROM

[KatManDEW]

Ratte wrote:
1. uppercase letters are important "KICK13.ROM"
- seems to be OK -

2. the romfile must be an 100% image of a v34.5 a500/a2000-kickstart
- no a1000 betas or modified kickstarts (config patch for memory or pal-patches etc.)

try to save your romimage from a a500 with real 1.3 ROM

I named it all upercase KICK.ROM.

I don't have an A500, and my A2000 is Kickstart version 40.63 ;-(

[desiv]

Another "bringing this thread back from the dead" post.

Just an interesting and expected finding, but thought I'd list it anyway..

I just got an AE High Density floppy drive a bit ago..
Was playing with it, and got it working on my Amiga 1000.
I was using a standard WB boot disk for this, as my KickWork disk was a bit full. ;-)
(In that, I'd use the Kickwork to kickstart, but then ejected it and put in copy of a standard WB disk to install the AEHD drivers..)

OK, so I made a copy of my kickwork disk and cleared a bit of space to make room for the drivers..

And it doesn't work. No shock.
Everything seems fine, until I load DEVS:AETD.device, which is what patches trackdisk device.
When I do that, I lose my kickwork boot partition.
(Starts telling me to insert KickWork, which is still there..)

So, these 2 patches to trackdisk seem to not like eachother..

Just an interesting find..

desiv

[klx300r]

Poof! Bringing back this old thread :-)

Hoping to get my A1000 up & running in my office soon and a quick search of possibly booting kickstart 3.1 on it led me here.
I've got an 8mb board ordered from kipper so looks like some old school fun soon

[desiv]

I use a Kickwork disk on my A1000 currently, and it also loads the drivers for my IDE and RAM card and then transfers control to my IDE drive to finish the boot from the CF(IDE) card.

Works great.

I don't use kickwork to boot anything other than 1.3 tho.

If you're looking for 3.1, that's going to be something that (I think) only ratte has done.

desiv

[klx300r]

@ desiv

sounds good. I have always enjoyed (& still do) booting my A1000 with both kickstart & workbench disks but kickwork booting up wb3.1 is just so darn cool

btw, what IDE controller and CF card do you use/recommend ?