amiga.org
     
iconAll times are GMT -6. The time now is 01:51 AM. | Welcome to Forum, please register to access all of our features.

» Amiga.org » Amiga computer related discussion » Amiga Hardware Issues and discussion » Indivision ECS - Pulling my hair out

Amiga Hardware Issues and discussion This forum is dedicated to the discussion and resolution of issues related to Classic and Next Generation Amiga hardware. Got a problem with a piece of hardware? Click to speak.

Reply
 
Thread Tools Display Modes
Old 08-19-2012, 01:22 AM   #16
AmmoJammo
Technoid
Points: 2,688, Level: 31 Points: 2,688, Level: 31 Points: 2,688, Level: 31
Activity: 8% Activity: 8% Activity: 8%
 
AmmoJammo's Avatar
 
Join Date: May 2012
Location: Adelaide, Australia
Posts: 467
Default Re: Indivision ECS - Pulling my hair out

so, how did it go?
AmmoJammo is offline   Reply With Quote
Old 08-19-2012, 07:19 PM   #17
k4lmp
Technoid
Points: 2,389, Level: 29 Points: 2,389, Level: 29 Points: 2,389, Level: 29
Activity: 1% Activity: 1% Activity: 1%
 
k4lmp's Avatar
 
Join Date: Apr 2012
Location: Church Hill, TN
Posts: 238
Default Re: Indivision ECS - Pulling my hair out

Yeah, we need an update. I hope you got it. Like I said in my earlier post, I was very frustrated with mine, until I discovered it wasn't plugged in all the way, but after I figured that out (with help from this board), it is working great. If it was a bad one, I hope you got another one. Let us know what you found out.
__________________
A2000HD 6.2, 2 Mb Chip RAM, 3.1 KS
GVP GForce 030 SCSI Card 13Mb RAM
A2058 8Mb Fast RAM
SCSI CD-RW
Indivision ECS, MegaChip A2000
MultiFaceCard III, Alfa Data External Floppy & Trackball
MechWare Reader, WB3.1 w/ClassicWB Lite

A2000 6.2, 1 Mb Chip, 3.1 KS
A2630 2Mb RAM, SupraRAM 8Mb
GVP Impact A2000-HC SCSI Controller
A2232 Serial Card
MechWare Reader, WB3.1

A500+, 1.5 Mb Chip, 3.1 KS, 68010 CPU
GVP A500 HD+8 w/8Mb RAM
GBS-8200 RGB-VGA Converter
MechWare Reader, ClassicWB 68K
k4lmp is offline   Reply With Quote
Old 08-21-2012, 07:31 PM   #18
Lurch
Defender of the Faith
Points: 12,791, Level: 73 Points: 12,791, Level: 73 Points: 12,791, Level: 73
Activity: 24% Activity: 24% Activity: 24%
 
Lurch's Avatar
 
Join Date: Dec 2003
Location: Auckland, New Zealand
Posts: 1,062
Send a message via MSN to Lurch
Default Re: Indivision ECS - Pulling my hair out

Well it's been awhile but I finally got my IndiECS back from Amigakit. Which is where the good news finishes :-)

I have a new A500 plus board (well you know what I mean), installed the Indi same issue only worse now.

Colours very bright and washed out

Now and then on boot a red screen and flashing led on the Amiga.

Indi tool has the buttons but doesn't show you the settings beside it. Click any of the buttons and the Amiga locks/freezes.

Horizontal lines now follow the mouse

Green flashing is a ghost image of what is on screen.

Connect up my Amiga maniac s-video and VGA convertor box works great.

My views on the Indi so far are not that great. Brings back the old term plug and pray.

So not far off holding a burning ceremony just need to borrow a handy cam for the moment.
__________________
-=[LurcH]=-
A500 Plus·Black·030@14Mhz·2MB·8MB·A590·KS 3.1·WB 3.1·2GB CFCard·Mechware SCSI Card Reader·Indivision ECS
A1200 Tower·060@80MHz·2MB·32MB·KS 3.9·WB 3.9·Indivision AGA MkII·40GBHDD·FastATA·HxC2001·WPA2 Wireless·Subway USB·Pico ITX PSU·PS2/USB Mouse·Lyra2
Amiga Forever 2012 (Thanks MCB)
PowerMac G4·MorphOS Box·SBlive·5 port USB card
Indivision ECS (Chris at Amigakit is da'Man)
A1200 board·new caps·timing fixes (another awesome job Amigakit)
www.taf.org.nz
Lurch is offline   Reply With Quote
Old 08-22-2012, 01:56 AM   #19
AmmoJammo
Technoid
Points: 2,688, Level: 31 Points: 2,688, Level: 31 Points: 2,688, Level: 31
Activity: 8% Activity: 8% Activity: 8%
 
AmmoJammo's Avatar
 
Join Date: May 2012
Location: Adelaide, Australia
Posts: 467
Default Re: Indivision ECS - Pulling my hair out

so, you sent it to them, they said it was fine and sent it back?

or, they replaced it?
AmmoJammo is offline   Reply With Quote
Old 08-22-2012, 02:23 AM   #20
Crumb
Defender of the Faith
Points: 11,878, Level: 71 Points: 11,878, Level: 71 Points: 11,878, Level: 71
Activity: 33% Activity: 33% Activity: 33%
 
Crumb's Avatar
 
Join Date: Mar 2002
Posts: 1,724
Default Re: Indivision ECS - Pulling my hair out

Quote:
Originally Posted by Lurch View Post
Yep, stripped right back to just a motherboard, 68000 and the indivision. So a little puzzled.
What PSU are you using? Bad PSUs could cause visual problems like the ones you describe.
__________________
The only spanish amiga news web page/club: Club de Usuarios de Amiga de Zaragoza (CUAZ)
Crumb is offline   Reply With Quote
Old 08-22-2012, 02:27 AM   #21
Lurch
Defender of the Faith
Points: 12,791, Level: 73 Points: 12,791, Level: 73 Points: 12,791, Level: 73
Activity: 24% Activity: 24% Activity: 24%
 
Lurch's Avatar
 
Join Date: Dec 2003
Location: Auckland, New Zealand
Posts: 1,062
Send a message via MSN to Lurch
Default Re: Indivision ECS - Pulling my hair out

@ AmmoJammo - Sent it back and they said they knew what it was and applied a fix :-)

@ Crumb - Have tried a standard Amiga PSU and two ATX PSU's. A Pico and standard ATX.

Works fine if I'm using an s-video adapter, only get the problems when the Indi is being used.

Don't really want to go through sending it back again as last time it took two months :-/ Have updated them so will see what they come back with.
__________________
-=[LurcH]=-
A500 Plus·Black·030@14Mhz·2MB·8MB·A590·KS 3.1·WB 3.1·2GB CFCard·Mechware SCSI Card Reader·Indivision ECS
A1200 Tower·060@80MHz·2MB·32MB·KS 3.9·WB 3.9·Indivision AGA MkII·40GBHDD·FastATA·HxC2001·WPA2 Wireless·Subway USB·Pico ITX PSU·PS2/USB Mouse·Lyra2
Amiga Forever 2012 (Thanks MCB)
PowerMac G4·MorphOS Box·SBlive·5 port USB card
Indivision ECS (Chris at Amigakit is da'Man)
A1200 board·new caps·timing fixes (another awesome job Amigakit)
www.taf.org.nz
Lurch is offline   Reply With Quote
Old 08-22-2012, 05:01 AM   #22
Lurch
Defender of the Faith
Points: 12,791, Level: 73 Points: 12,791, Level: 73 Points: 12,791, Level: 73
Activity: 24% Activity: 24% Activity: 24%
 
Lurch's Avatar
 
Join Date: Dec 2003
Location: Auckland, New Zealand
Posts: 1,062
Send a message via MSN to Lurch
Default Re: Indivision ECS - Pulling my hair out

Going to grab another ATX PSU from work and go from there :-)

2 ATX
1 PICO
1 A500 (heavy version) PSU

Tried so far, so whats one more? ;-)
__________________
-=[LurcH]=-
A500 Plus·Black·030@14Mhz·2MB·8MB·A590·KS 3.1·WB 3.1·2GB CFCard·Mechware SCSI Card Reader·Indivision ECS
A1200 Tower·060@80MHz·2MB·32MB·KS 3.9·WB 3.9·Indivision AGA MkII·40GBHDD·FastATA·HxC2001·WPA2 Wireless·Subway USB·Pico ITX PSU·PS2/USB Mouse·Lyra2
Amiga Forever 2012 (Thanks MCB)
PowerMac G4·MorphOS Box·SBlive·5 port USB card
Indivision ECS (Chris at Amigakit is da'Man)
A1200 board·new caps·timing fixes (another awesome job Amigakit)
www.taf.org.nz
Lurch is offline   Reply With Quote
Old 08-23-2012, 01:28 AM   #23
Lurch
Defender of the Faith
Points: 12,791, Level: 73 Points: 12,791, Level: 73 Points: 12,791, Level: 73
Activity: 24% Activity: 24% Activity: 24%
 
Lurch's Avatar
 
Join Date: Dec 2003
Location: Auckland, New Zealand
Posts: 1,062
Send a message via MSN to Lurch
Default Re: Indivision ECS - Pulling my hair out

Another PSU 300W ATX, one board, one indivision, one monitor, nothing else. Same result.

I give up :-)
__________________
-=[LurcH]=-
A500 Plus·Black·030@14Mhz·2MB·8MB·A590·KS 3.1·WB 3.1·2GB CFCard·Mechware SCSI Card Reader·Indivision ECS
A1200 Tower·060@80MHz·2MB·32MB·KS 3.9·WB 3.9·Indivision AGA MkII·40GBHDD·FastATA·HxC2001·WPA2 Wireless·Subway USB·Pico ITX PSU·PS2/USB Mouse·Lyra2
Amiga Forever 2012 (Thanks MCB)
PowerMac G4·MorphOS Box·SBlive·5 port USB card
Indivision ECS (Chris at Amigakit is da'Man)
A1200 board·new caps·timing fixes (another awesome job Amigakit)
www.taf.org.nz
Lurch is offline   Reply With Quote
Old 08-23-2012, 01:58 AM   #24
AmiDude
Cult Member
Points: 8,176, Level: 61 Points: 8,176, Level: 61 Points: 8,176, Level: 61
Activity: 10% Activity: 10% Activity: 10%
 
AmiDude's Avatar
 
Join Date: Oct 2005
Posts: 797
Default Re: Indivision ECS - Pulling my hair out

It's crap. Send it back for a refund.
AmiDude is offline   Reply With Quote
Old 08-23-2012, 03:52 AM   #25
paul1981
Cult Member
Points: 4,187, Level: 41 Points: 4,187, Level: 41 Points: 4,187, Level: 41
Activity: 27% Activity: 27% Activity: 27%
 
paul1981's Avatar
 
Join Date: Nov 2009
Location: England
Posts: 614
Default Re: Indivision ECS - Pulling my hair out

Is it possible you could record a video of the actual fault so we can all see what we're dealing with? If we could see it, some people may have a good idea where the problem lies.
paul1981 is offline   Reply With Quote
Old 08-23-2012, 05:43 AM   #26
Lurch
Defender of the Faith
Points: 12,791, Level: 73 Points: 12,791, Level: 73 Points: 12,791, Level: 73
Activity: 24% Activity: 24% Activity: 24%
 
Lurch's Avatar
 
Join Date: Dec 2003
Location: Auckland, New Zealand
Posts: 1,062
Send a message via MSN to Lurch
Default Re: Indivision ECS - Pulling my hair out

http://youtu.be/0m1cxu-C1gA?hd=1

A little hard to see the jelly (jello) wobbly screen and the entire screen flashing green really quickly.

Can see the lines and flicking and tearing :-)
__________________
-=[LurcH]=-
A500 Plus·Black·030@14Mhz·2MB·8MB·A590·KS 3.1·WB 3.1·2GB CFCard·Mechware SCSI Card Reader·Indivision ECS
A1200 Tower·060@80MHz·2MB·32MB·KS 3.9·WB 3.9·Indivision AGA MkII·40GBHDD·FastATA·HxC2001·WPA2 Wireless·Subway USB·Pico ITX PSU·PS2/USB Mouse·Lyra2
Amiga Forever 2012 (Thanks MCB)
PowerMac G4·MorphOS Box·SBlive·5 port USB card
Indivision ECS (Chris at Amigakit is da'Man)
A1200 board·new caps·timing fixes (another awesome job Amigakit)
www.taf.org.nz
Lurch is offline   Reply With Quote
Old 08-23-2012, 07:06 AM   #27
nscaleworld
Banned
Points: 551, Level: 11 Points: 551, Level: 11 Points: 551, Level: 11
Activity: 99% Activity: 99% Activity: 99%
 
Join Date: Jun 2012
Posts: 101
Default Re: Indivision ECS - Pulling my hair out

Appears to be noise. Make sure board is grounded and shielded.
nscaleworld is offline   Reply With Quote
Old 08-23-2012, 07:20 AM   #28
nscaleworld
Banned
Points: 551, Level: 11 Points: 551, Level: 11 Points: 551, Level: 11
Activity: 99% Activity: 99% Activity: 99%
 
Join Date: Jun 2012
Posts: 101
Default Re: Indivision ECS - Pulling my hair out

This would be perfect in my Amiga 500 tower computers, but the price is too fracken high. Now if they were $59.95 I would buy two of them, but, over $100.00 each, screw that. I am not stupid enough to pay that kind of money for one of these boards. Places like AmigaKit, they really take advantage of you people, and they are laughing at you all the way to the bank.

Last edited by nscaleworld; 08-23-2012 at 07:24 AM..
nscaleworld is offline   Reply With Quote
Old 08-23-2012, 07:47 AM   #29
outlawal2
Too much caffeine
Points: 3,466, Level: 36 Points: 3,466, Level: 36 Points: 3,466, Level: 36
Activity: 12% Activity: 12% Activity: 12%
 
Join Date: Aug 2008
Location: Western Wisconsin, USA
Posts: 147
Default Re: Indivision ECS - Pulling my hair out

Quote:
Originally Posted by nscaleworld View Post
This would be perfect in my Amiga 500 tower computers, but the price is too fracken high. Now if they were $59.95 I would buy two of them, but, over $100.00 each, screw that. I am not stupid enough to pay that kind of money for one of these boards. Places like AmigaKit, they really take advantage of you people, and they are laughing at you all the way to the bank.
I don't even know why I frequent this forum anymore... The rampant idiocy is beyond ridiculous. It is a damned good thing that breathing is an involuntary thing as I am certain that if active THOUGHT was required many of you would be dead by now.

OK I will talk real slow for you so you hopefully won't miss anything..

As has been stated at least 20 trillion times on this board and many others, building hardware for the Amiga (or any other extremely limited quantity item) means that the possible sales of such hardware will be extremely low as well... Low quantities means a higher price for each one as the higher the quantity sold the more you can spread the R&D, manufacturing, overhead etc.

Once again you guys bitch piss and moan that no one builds anything for the Amiga and then when they do you slam them for it and whine that they don't give it away.

I think the world is being taken over by Spock's (Dr. Spock, NOT the Star Trek one) children and you are so whiny, needy, spoiled and "Entitled" that you have moved into the land of absolute IDIOCY.

Oh and the answer is that if it is to pricey for YOU, just don't buy it...
but save the rest of us your self-centered opinions based on lack of thought or intellect..
outlawal2 is offline   Reply With Quote
Old 08-23-2012, 08:03 AM   #30
nscaleworld
Banned
Points: 551, Level: 11 Points: 551, Level: 11 Points: 551, Level: 11
Activity: 99% Activity: 99% Activity: 99%
 
Join Date: Jun 2012
Posts: 101
Default Re: Indivision ECS - Pulling my hair out

It is too pricey, so, I will not buy it. I do not support greedy people. I worked in the electronics industry for many years, there is no reason for this board to cost more then $59.95, accept maybe greed. And to be frank, even $59.95 seems a bit high to me for what this is.

REMEMBER: Greed was the main reason why Commodore went out of business in the first place.

Last edited by nscaleworld; 08-23-2012 at 08:07 AM..
nscaleworld is offline   Reply With Quote
Reply

Bookmarks

Tags
ecs , hair , indivision , pulling

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump