»

[WeiXing3D]

Originally Posted by Kawazu

The other picture i posted that i marked in the lower corner.
Now compare that old picture to this.



At the point i marked they have placed a jumper on top of those two pins, its not hard, you have two holes and two pins that goes into them you cant do it wrong as long as you place them on the two pints i have marked.

Kawazu, I will be receiving the jumpers I ordered from amigakit next week. I only have one more question: Should I leave the case of the Amiga open exposing the Deneb board, while I connect and turn on the system, so that I can download the software and applications? Then remove the jumper when finished and close the case?