»

[itix]

http://moobunny.dreamhosters.com/cgi...a/219881.shtml

[MastaTabs]

http://www.sam-jordan.ch/

[Hattig]

Originally Posted by itix

http://moobunny.dreamhosters.com/cgi...a/219881.shtml

Interesting read. And pretty much states outright the foolishness of using the e500 core when you need a standard PowerPC with FPU. I hope that the UltimatePPC people take this on board and maybe take a look at SoCs from AMCC or better Freescale SoCs instead.

[psxphill]

Originally Posted by buzz

that sounds like an expensive way to run aros.

you know there is a difference between me having the freedom to do something, and you telling me to do something right ?

You either want to do something or you don't. If you're just in love with the idea that you should be able to do whatever you want but you're not going to contribute anything back then tough, nobody cares.

AROS on UltimatePPC is what you need to achieve your objectives, you just need to get over the idea that MorphOS or AOS4 should be open source.

[buzz]

Originally Posted by psxphill

You either want to do something or you don't. If you're just in love with the idea that you should be able to do whatever you want but you're not going to contribute anything back then tough, nobody cares.

AROS on UltimatePPC is what you need to achieve your objectives, you just need to get over the idea that MorphOS or AOS4 should be open source.

No - I want the freedom to be able to do something. I don't need telling what I should or shouldn't do - and I already contribute huge amounts of my free time (close to all of it) to open source projects.

AROS on ultimatePPC isn't going to be that useful when it runs better on cheaper already available hardware. but yeh, the freedom is there to do it. I don't see your point though.

[Tahoe]

Update from the developers:

Happy Holidays from the UltimatePPC team!*

As we are nearing the summer holidays it is time for a quick status update from our side. The last few months have been hectic as both Gideon and myself have been extremely busy with personal affairs besides trying to advance the UltimatePPC project. As we have the prototype boards in our hands we have been actively working on booting a basic kernel on the PowerPC core and interfacing the board to the Amiga bus. Parallel we are starting the software development side of things, with WarpOS support being worked on - as well as first contact with Hyperion regarding AmigaOS4 support.

We also keep an eye on feedback from the community and are evaluating the choice made for the P1013 CPU.We knew that the FPU in this processor is incompatible with the ones found on older PowerPC boards. Our original plan to fix these incompatibilities in software turns out to have more impact that we had foreseen. For this reason, we will reconsider the choice of PowerPC CPU, while continuing the development work of other important stuff on the current prototype.

So what's next? First we'll take a few weeks off for holidays and time with family. Somewhere in August we get together again… Expect a new update end of August! Happy holidays!