Register or have you forgotten your password?
|
|
Register or have you forgotten your password?
|
All times are GMT -6. The time now is 07:30 PM.
| Welcome to Forum, please register to access all of our features.
|
|
| Amiga Hardware Issues and discussion This forum is dedicated to the discussion and resolution of issues related to Classic and Next Generation Amiga hardware. Got a problem with a piece of hardware? Click to speak. |
 |
|
|
Thread Tools | Display Modes |
05-09-2012, 02:09 AM
|
#1 | ||||||||
|
Merely Curious
Join Date: Jul 2009
Location: Worcestershire
Posts: 16
|
Indivision AGA MK2 Failure?
Hi All,
I installed the indivision in my 1200 yesterday. Worked fine for about 2 hours connected via DVI and I also tried VGA, then had to go out so I switched the Amiga off. Later I thought I would try a DVI - HDMI cable as I want to use my pc monitor for my 1200, while having the pc connected by DVI. The cable didn't work so I tried the DVI cable, still nothing. So I tried a different monitor, not working with that either. Have tested the machine through RGB on my CM8833 and it works fine. Any suggestions? Thanks |
||||||||
|
|
|
05-09-2012, 02:43 AM
|
#2 | ||||||||
|
Technoid
Join Date: Oct 2009
Location: Netherlands
Posts: 329
|
Re: Indivision AGA MK2 Failure?
I can only point out the obvious things... is it still seated properly or did it move slightly because of heating up and cooling down?
Other than that, maybe it's broken? There's no LED on it or anything to check it's working... |
||||||||
|
|
|
|
05-09-2012, 02:51 AM
|
#3 | ||||||||
|
Merely Curious
Join Date: Jul 2009
Location: Worcestershire
Posts: 16
|
Re: Indivision AGA MK2 Failure?
It's still seated fine. Looks like it is broken.
 Only trouble now is Amigakit's tech guy is off now until the 21St May.
|
||||||||
|
|
|
|
05-09-2012, 03:37 AM
|
#4 | ||||||||
|
Defender of the Faith
|
Re: Indivision AGA MK2 Failure?
Well in this case any company with good support would just directly replace the board. I'm sure there is surplus and they must have a deal with Individual for failures... so the tech guy being on holiday shouldnt factor in imho.
Of course, that is indeed if the board is faulty.
__________________
bPlan Pegasos2 G4@1ghz Quad Boot:Reg. MorphOS /Amiga OS4.1 U4/Ubuntu GNU-Linux /MacOS X Amiga Technologies A1200 HD | Blizzard 1260@66mhz | 128mb | OS 3.9 | Indivision MK2 |
||||||||
|
|
|
|
05-09-2012, 04:52 AM
|
#5 | ||||||||
|
Commodore is Awesome
|
Re: Indivision AGA MK2 Failure?
The seating meathod on these devices is similar to the accelerator I have in my 600. I had trouble initially with it even though it was seated right. So I removed the card and cleaned all the contacts on the cpu before reseating it. Maybe you could do the same with the chip that the indi sits on. Just use a bit of cleaning alcohol theb nake sure you seat theindi firmly after. It should make a lot of little clicks and creaks when seating.
|
||||||||
|
|
|
|
05-09-2012, 10:06 AM
|
#6 | |||||||||
|
Merely Curious
Join Date: Jul 2009
Location: Worcestershire
Posts: 16
|
Re: Indivision AGA MK2 Failure?
Quote:
Followed your advice and it now works again! Thanks! I feel like a idiot, should of thought of that. When it stopped working I just presumed the worst. |
|||||||||
|
|
|
|
05-09-2012, 10:19 AM
|
#7 | |||||||||
|
Defender of the Faith
Join Date: Mar 2009
Posts: 1,265
|
Re: Indivision AGA MK2 Failure?
Quote:
|
|||||||||
|
|
|
|
05-09-2012, 10:22 AM
|
#8 | |||||||||
|
Commodore is Awesome
|
Re: Indivision AGA MK2 Failure?
Quote:
|
|||||||||
|
|
|
|
05-09-2012, 12:49 PM
|
#9 | ||||||||
|
Too much caffeine
Join Date: Aug 2008
Location: Western Wisconsin, USA
Posts: 147
|
Re: Indivision AGA MK2 Failure?
Glad to hear it wasn't faulty. I just ordered one yesterday!
|
||||||||
|
|
|
|
| Bookmarks |
| Tags |
| aga , failure , indivision , mk2 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
