amiga.org
     
iconAll times are GMT -6. The time now is 06:21 AM. | Welcome to Forum, please register to access all of our features.

» Amiga.org » Amiga computer related discussion » Amiga Marketplace » FS: Complete A1200T or individual components?

Amiga Marketplace This forum is here so that members can alert other members to Amiga items they've seen on eBay (or other auctions). If you are selling Amiga items on eBay, you might let us know about them here. Likewise, if you're selling Amiga items sans eBay, this is the "for sale" forum.

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 04-19-2012, 05:39 PM   #1
Zadoc
Technoid
Points: 7,802, Level: 59 Points: 7,802, Level: 59 Points: 7,802, Level: 59
Activity: 12% Activity: 12% Activity: 12%
 
Join Date: Feb 2002
Location: Upstate NY, USA
Posts: 296
Send a message via AIM to Zadoc
Default FS: Complete A1200T or individual components?

I'm in the process of cleaning up my Amiga 1200 tower setup in order to sell it, but as I've been pretty far removed from the Amiga scene that I'm honestly not really sure what my best course of action would be - to sell the system as a whole, or to sell off the individual components?

I realize that the 060 card should sell easily enough, but I'm just not sure about the rest of it. I'd hate to have the 060 being the only thing that sells and have the rest of the tower taking up space if I chose to part with the components individually.

Essentially what I've got is an Elbox/Winner PowerTower that contains:

* Escom Amiga 1200 NTSC motherboard with 3.1 ROMs.
* Blizzard 1260 060/66Mhz accelerator with 64MB 72-pin EDO RAM
+ 1230 SCSI Kit with another stick of 64MB 72-pin EDO RAM. (No cable for the 25-pin external port.)
* ZIV Zorro II daughterboard
+ Highway USB Zorro II card (missing one of the internal USB cables, 8-pin IDC header to the external port for the backplate)
* Mediator ZIV PCI busboard (whether buying the Mediator ZIV PCI board separately or with the entire setup, the MMCD will be included)
+ Voodoo3 PCI GFX card
+ Soundblaster 128
+ RTL-8139 Ethernet
* ZIV FastATA card
* 40x Memorex ATAPI CD-ROM
* 3.5" 880KB floppy

One issue with this setup is that the Voodoo3 produces corrupted graphics under P96. This is the second Voodoo3 card that I've had in this machine, and the first one I had gradually did the exact same thing until it was replaced by this one, which over time eventually ended up the same way. I suspect that it's likely a problem with the Mediator itself and not a software issue, but I have no way to verify this. However, all other cards - including the RTL-8139 and the SB128 both of which require the Voodoo card to operate - work fine.

Any suggestions, advice, or offers would be welcomed and appreciated. I'd be glad to answer any questions and will post pictures once it's been cleaned up a bit (I feel I should note that I was a cigarette smoker during the time this machine was in day to day use.)

** EDIT ** Since I've been asked a few times, I'm located in the USA in Upstate NY (near Syracuse).
__________________
Welcome to my Nightmare
Zadoc...and the Nightmare

Last edited by Zadoc; 04-19-2012 at 07:11 PM.. Reason: Added location
Zadoc is offline   Reply With Quote
 

Bookmarks

Tags
1260 , a1200t , complete , components , highway , individual , mediator , ziv

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump