»

[AmiDude]

It's very buggy... It doesn't work for me.

[polyp2000]

Two questions ...

A long shot i know - but just wondering if anyone has tried this with the indi AGA ?

Does Jens know about this driver and would he plan on incorporating it into the official ones?

[NovaCoder]

STATUS: BETA / ALPHA you should know what you are doing! Requirements: installed Amiga (ECS), a minimum of 4MB Fast RAM with MMU and a Indivision ECS (Core 1.1) 1.1

Installation: - Install MMULib Picasso96 + (libs Version: picasso96.library min version 2.3!) - Replace incompatible with the MMU program MMULib equivalents . - Copy all files of the install archive to the equivalent directories

FAQ:
Q: I can not boot anymore. I can only start via the boot menu and choosing "no startup-sequence" A: Press both mouse buttons, the Picasso system is not activating in such a situation!
Q: How to uninstall? A: The Indivision driver can be deleted in the devs: monitors directory. After that only the Picasso96 system and the libraries mmu stay inside. Picasso96 is activated on starting a driver in the devs: monitors directory (for example uaegfx, domino ..). Delete all "NEW" drivers installed by Picasso96. And please do not touch your PAL, NTSC drivers.
Q: I do not have a indivisionECS installed, but something happens. A: There is not HARDWARE detection inside. Your should know what you are doing.
Q: Did you support the AGA MK # 2? A: Nobody knows right now, if it is possible. We must wait for it.
Q: Is it possible to play games on a AGA ECS / OCS Amiga? A: No its not possible. Maybe you can "play" a RTG game. But it is maybe a little bit slow!
Q: Why should I backup my system? A: Do not blame me if something goes wrong. I can only test on one amiga with one config! And there is everything ok.
Q: ACATune my accelerator did not find any more?
A: That's because of the MMU Library.

Hope that helps (taken from a1k.org)

[Piru]

Originally Posted by polyp2000

just wondering if anyone has tried this with the indi AGA ?

It doesn't work as Indivision AGA works in a completely different way to indivision ECS.

[lost_loven]

system loops when load modules for the scsi.device in startup-sequence, just keeps rebooting to a black screen. Bugs loven em!

lost
@NovaCoder - didn't work for me.

Hiya Symplex,

New RTG version OF BOOMS that only renders screen update (flickers), lake if you CAN GET it running

BOOM_RTG.lha

[AmiDude]

Originally Posted by NovaCoder

STATUS: BETA / ALPHA you should know what you are doing! Requirements: installed Amiga (ECS), a minimum of 4MB Fast RAM with MMU and a Indivision ECS (Core 1.1) 1.1

Installation: - Install MMULib Picasso96 + (libs Version: picasso96.library min version 2.3!) - Replace incompatible with the MMU program MMULib equivalents . - Copy all files of the install archive to the equivalent directories

Hope that helps (taken from a1k.org)

I have all the above correctly installed. Still no go...

It does show up in the ScreenMode prefs as:
indi:320x240 - 58Hz, 38,28Khz
indi:640:480 - 87Hz, 38,28Khz
indi:800x600 - 87Hz, 38,28Khz
indi:1024x768 - 91Hz, 38,40Khz
IndivisionECS:800x600 - 0Hz, 0,00Khz

When I use the indi modes, the screen goes black and stays black. So I have to reboot the machine. When I use IndivisionECS:800x600 mode, the screen goes a few seconds black and then comes back, but it is just the "normal" PAL mode.

It also shows up in the P-96-prefs program, but the INDI screenmodes are not modifiable.

[chfriend]

I'm having the exact same problem as Amidude when I tried loading it onto my 2000 except if I hit test in P96Prefs, it works for the test screen.

[lost_loven]

looks like to me your your monitor can't sync that high. I am not near my miggy right now (will look later) but its around 58ish/32ish for 800x600. try copying 2.0, the copy 2.e then copy 2.s over in that order. don't touch the p96 prefs at all. that happened to me and thats what i did and fixed it. hope that helps.

edit: also in monitors for the mouse in the info - softwaresprites=Yes if you have no mouse after the screen switching.
also i added this in my startup-sequence - libs: picasso96/indi.card

lost

[lost_loven]

version "v" and "w" did not work for me.

lost

[magnetic]

wow A600 running RTG never thought I see the day! Classic Amiga miracles happen every year!

[NovaCoder]

Check this -> mfilos video

[lost_loven]

saw that .. sweet! ... funny how a straight install of wb3.1 on 2 different machines can give different boot up's. I have to post mine with errors and without. With version w i think i saw something with fpga in the startup as it boots.. know wat thats about?

lost

[chfriend]

ARGH! Why won't this work for me! Whenever I try going into 800x600 my monitor wigs out and says the vertical refresh is 6553.5hz - 640x480 doesn't give an out of sync error but the screen goes black and the "test" option works for both.

HELP ME KOBI WAN ENOBI!

[magnetic]

I dunno but with all the bounties out there in the amiga community. You would think there would be a bounty for this driver so that this dev could get help from another dev. RTG with INdivision for ecs machines would be a big boon to classics

[lost_loven]

looking at 1024x768 and it shows 91hz 38.40hz which won't work on my flat screen. any work around this? 58hz x 38.28 works and thats 800x600. be nice to have a bigger 256 color workbench! ..

@chrfriend .. did you update the core and install everything? i did it in the order listed.
- Install MMULib + Picasso96 (Version libsicasso96.library min Version 2.3!)
- Replace incompatible MMU programms with the MMULib equivalents.
- Copy all files of the install archive to the equivalent directorys

lost