|03-29-2012, 06:55 AM||#1|
Defender of the Faith
Join Date: Oct 2005
Very weird (slight) issue with GVP Combo
2 Days ago i received my GVP Combo 040 card for my A2000.
Installed it and working fine, until I went to use the CDROM drive. As soon as I try and access the drive the HD LED would light up for a few seconds and the "waiting" pointer will come and I would have to reboot.
After lots of messing around I found that if I unplug the HD LED from the Combo 040 everything including the CDROM would work fine as it is supposed to.
What I find strange is:
A: The HD LED was plugged in the correct connector of the Combo and access LED worked fine.
B: With my old HC8+ SCSI controller I never had this problem.
Anyway I ended up connecting the HD LED to the connector on the actual hard drive and I have had no problems since.
But I fail to understand why this problem of the CDROM was associated with the HD LED connector / LED... Its so weird. And I know its that because whenever it was disconnected from the combo cdrom would work fine. As soon as I connect it would do the problem.
A1200HD- Blizzard 1230IV / 64Mb / Kick 3.1 / OS 3.9 / 20GB HD / Indivision
A2000 Rev4.4 - Stock (But with ECS chipset) / 1MB Chip mode
CD32 - Stock (W/ 2 CD32 Controllers]
A500 Plus - 68000 @ 7Mhz / 2MB Chipmem / 2Mb Fast ram / 2.04/Kick1.3 / A590
A600HD - 2MB Chip / 8MB Fast / 2GB CF HD / Kick 3.1
Various Spare A500's and A500 Plus's
PowerMac G4 1Ghz (MorphOS / Leopard)
|combo , gvp , issue , slight , weird|