|12-19-2002, 01:22 PM||#1|
Amiga 4000 doesn't recognize GVP A2000-HC+8
I have an Amiga 4000 rev B. No Zorro cards, exept a GVP A2000-HC+8 card with no extra ram.
Some time ago the card made the computer crash all the time, within 30 seconds the system hang. I tried reconfiguring the jumpers, but nothing helped. Then I set a jumper wich was not documented (j3), next to the ID-jumpers and the Boot-jumper. Since than the card is not even recognized anymore.
I read somewhere, that I might have burned a trace on the A4000's daughterboard. The document said I should check pin 12 from the plug the motherboard to pin 12 on the zorro connectors one by one. I did that, and found out there was a connection.So I gues it's a different problem.
Can some one help me with this PROBLEM?
|a2000 , amiga , 4000 , gvp , recognize , a2000hc|
|Thread||Thread Starter||Forum||Replies||Last Post|
|How to see if the 600 recognize my harddrive||daniel_swe||Amiga Hardware Issues and discussion||1||02-24-2009 10:10 AM|
|My BPPC doesn't recognize 256 MB - Why?||Daniele||Amiga Hardware Issues and discussion||7||04-13-2008 06:01 PM|
|FA: Scandoubler for A2000 & A3640 for A3000-4000||countzero||Amiga Marketplace||3||05-28-2007 01:14 AM|
|What MS-DOS file systems can the amiga recognize?||J-Golden||Amiga Software Issues and Discussion||10||09-11-2005 12:04 PM|
|CDRW not recognize ?||lionstorm||Amiga Emulation||5||06-05-2003 08:40 AM|