|12-04-2010, 08:19 PM||#1|
Join Date: Nov 2010
CD32 Port A fault
I'm new to the forum... I come seeking help.
I've got an intermittent fault with my CD32, where it thinks I'm holding down the up arrow on the pad. It happens after a cold start or reboot but eventually goes away, at least for a bit.
I've checked the board for dry joints but I can't find anything obvious. I'm thinking a pullup resistor isn't connected somewhere and an input is floating, though I'm not very familiar with the circuitry.
The Joystick I'm using (a QuickShot) emulates Atari, Amstrad, MSX and Sega controllers. It happens on all settings.
|12-05-2010, 07:12 AM||#2|
Defender of the Faith
Re: CD32 Port A fault
I have the exact same problem with my second A600. I'm hoping once I get the capacitors replaced it might help fix a few problems.
A1200 030@28Mhz/2MB+32MB/RTC/KS3.1/IDE-CF+4GB/4-Way Clockport Expander/IndivisionAGA/PCMCIA NIC
A600 030@30Mhz/2MB+64MB/RTC/IDE-CF+4GB/Subway USB/S-Video/PCMCIA NIC/USB Numeric Keypad+Hub+Mouse+Control Pad
A500 000@7Mhz/512kB+512kB/ROM Switcher/KS3.1+1.3/S-Video
Get AmigaOS for your PC, it's FREE and comes in two flavours!
|cd32 , port , fault|